Quantifying the influence of slope, aspect, crown shape and stem density on the estimation of tree height at plot level using lidar and InSAR data
Authors:
- 25 February 2008
- journal article
- conference paper
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 29 (5) , 1511-1536
Abstract
This study compared the use of light detection and ranging (lidar) data and X‐band interferometric synthetic aperture radar (InSAR) data for estimating Lorey's height (H L) within inventory plots. At plot level, H L can be estimated with a root mean squared error (RMSE) of 1.8 m or 6.0% using lidar data and 2.7 m or 9.0% using InSAR data. The most effective predictor variables were found to be the 75th percentile of the vegetation heights for lidar (p75 lidar) and the 90th percentile for InSAR (p90 InSAR). Estimation results can be improved considerably by incorporating ground slope into the models. An increase in slope, given the same field‐measured H L, was associated with an upward shift in height percentiles. We assume that this is a cause of the asymmetrical crown shape on slopes. An interaction between slope and aspect was noted for InSAR data, with a tendency for the influence of slope to be stronger on upward (i.e. for slopes facing the InSAR sensor) than downward slopes. Comparison of the lidar‐ and InSAR‐derived vegetation heights revealed that the p90 InSAR is more commonly below the p75 lidar. This difference was greater on upward than downward slopes. Estimations of H L can be further improved if additional information, such as the conifer proportion (CP) (as a surrogate for crown shape) or stem density (SD), is included in the models. It was possible to substitute the predictor variable CP by means of density metrics in the statistical models that depend on InSAR data. However, this was not possible for the statistical models depending on lidar data. Density metrics were also not able to explain the variability that was explained by the predictor variable SD (this was the case for models that depend on lidar and on InSAR data).Keywords
This publication has 17 references indexed in Scilit:
- Forest height retrieval from commercial X-band SAR productsIEEE Transactions on Geoscience and Remote Sensing, 2006
- Estimating forest canopy fuel parameters using LIDAR dataRemote Sensing of Environment, 2005
- Accuracy of forest inventory using airborne laser scanning: evaluating the first nordic full-scale operational projectScandinavian Journal of Forest Research, 2004
- Vegetation height estimation from Shuttle Radar Topography Mission and National Elevation DatasetsRemote Sensing of Environment, 2004
- Practical large-scale forest stand inventory using a small-footprint airborne scanning laserScandinavian Journal of Forest Research, 2004
- Quantifying canopy height underestimation by laser pulse penetration in small-footprint airborne laser scanning dataCanadian Journal of Remote Sensing, 2003
- Combined high-density lidar and multispectral imagery for individual tree crown analysisCanadian Journal of Remote Sensing, 2003
- An evaluation of the JPL TOPSAR for extracting tree heightsIEEE Transactions on Geoscience and Remote Sensing, 2000
- Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimatorsCanadian Journal of Forest Research, 1998
- Determination of mean tree height of forest stands using airborne laser scanner dataISPRS Journal of Photogrammetry and Remote Sensing, 1997