Crystallization behavior and mechanical properties of crosslinked plasticized poly(L‐lactic acid)
- 30 October 2008
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 111 (3) , 1530-1539
Abstract
Enhancing the stability of plasticized poly(L‐lactic acid) (PLLA) with poly (ethylene glycol) (PEG) is necessary for its practical application. In this study, plasticized PLLA (PLLA/PEG 80/20 wt/wt) was crosslinked under γ‐ray (Co60) in the presence of triallyl isocyanurate (TAIC) as crosslinking agent. FTIR analysis revealed that PLLA, PEG, and TAIC formed a cocrosslinking structure. Crystallization behavior and mechanical properties of the crosslinked plasticized PLLA were investigated by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), scanning electron microscopy (SEM), and tensile tests. Experimental results indicated that the crystallization behaviors of both PEG and PLLA in the blends were restrained after irradiation. The melting peak of PEG in the crystallized samples disappeared at a low irradiation doses about 10 kGy. Although PLLA still owned the behavior of crystallize, its cold crystallization temperature and glass transition temperature shifted to higher temperature. Mechanical properties of the plasticized PLLA were strengthened through crosslinking. Both yield strength and elastic modulus of the samples increased after crosslinking. Elongation at break of the crosslinked plasticized PLLA decreased with the increase of crosslinking density but remained a high value over 200%. SEM images of fracture surfaces confirmed that the ductile fracture behavior of plasticized PLLA was kept after suitable crosslinking. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 28 references indexed in Scilit:
- Plasticization of Poly(l-lactide) with Poly(propylene glycol)Biomacromolecules, 2006
- Improvement of heat stability of poly(l-lactic acid) by radiation-induced crosslinkingPolymer, 2005
- Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularityPolymer, 2003
- Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularityPolymer, 2003
- Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol)Polymer, 2003
- Crosslinking of Poly(L-lactide) by γ-IrradiationMacromolecular Rapid Communications, 2002
- Crystallization of tethered polyethylene in confined geometriesJournal of Polymer Science Part B: Polymer Physics, 1999
- Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blendsPolymer, 1995
- Isothermal crystallization of end-linked poly(tetrahydrofuran) networksPolymer, 1994
- Radiation effects on poly(lactic acid)Polymer, 1983