Derivation of current density distribution by arc pressure measurement in GTA welding
Authors:
- D.-S. OhDOD.-S. Oh
- Y.-S. KimYKY.-S. Kim
- S.-M. ChoSCS.-M. Cho
- 1 July 2005
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 10 (4) , 442-446
Abstract
Arc pressure is an important factor in understanding physical arc phenomena, especially its effects on the penetration, size and shape of GTA welding. The purpose of the present study is to derive the current density distribution on the anode base metal from the measured arc pressure distribution in GTA welding using the results from previous investigators. Using the measured arc pressure distribution on the anode base metal in GTA welding from the central part to the circumference and the equations of Lin et al. and Maecker, the current density distribution was derived. Applying the derived equation from the present work, the current density distribution was calculated from the low current region to the high current region by means of shield gas mixing ratio. It is compared and discussed with the practical welding current and the derived current by numerical integration of the current density distribution from the central part to the circumference region.Keywords
This publication has 4 references indexed in Scilit:
- Pressures produced by gas tungsten arcsMetallurgical Transactions B, 1986
- Distribution of the heat and current fluxes in gas tungsten arcsMetallurgical Transactions B, 1985
- An Investigation of the Anode Energy Balance of High Intensity Arcs in Argon1963
- Plasmastr mungen in Lichtb gen infolge eigenmagnetischer KompressionThe European Physical Journal A, 1955