Effect of voltage sweep direction on the performance evaluation of P3HT : PCBM solar cells
Authors:
- 2 April 2012
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 21 (5) , 950-959
Abstract
Investigations on the effect of direction of voltage sweeps, on the current density–voltage (J–V) characteristics in polymer bulk‐heterojunction solar cells, based on the blend of poly(3‐hexylthiophene) (P3HT) and phenyl [6,6] C61 butyric acid methyl ester (PCBM), are reported with time. On the freshly prepared device, the direction of the voltage sweep did not have any effect; however, as the device started degrading, the change in direction of the voltage sweep resulted into different characteristics. Analysis beyond complete degradation, when all the photovoltaic parameters reduced to zero, revealed some interesting results. The J–V characteristics, measured with voltage sweep from −ve to +ve voltage, both in the dark and under illumination, were observed to pass through the second quadrant. On the other hand, with the change in the direction of voltage sweep, viz. from +ve to −ve voltage, the characteristics both in the dark and under illumination passed through the fourth quadrant. These results have been explained on the basis of polarization of the degraded active layer due to applied external voltage. This is an important effect and is observed to depend on the applied voltages during performance evaluation and becomes more prominent with time. This effect puts a question mark on the correctness of the method for calculation of the parameters of a degraded device. Studies on degradation of P3HT : PCBM solar cells showed that both the short circuit current density (Jsc) and the power conversion efficiency (η) decay exponentially, whereas the open circuit voltage (Voc) decays almost linearly with time. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 36 references indexed in Scilit:
- Reversible and Irreversible Interactions of Poly(3-hexylthiophene) with Oxygen Studied by Spin-Sensitive MethodsThe Journal of Physical Chemistry B, 2011
- Solar cell efficiency tables (version 35)Progress in Photovoltaics: Research and Applications, 2010
- Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printingSolar Energy Materials and Solar Cells, 2009
- Dynamics and reversibility of oxygen doping and de-doping for conjugated polymerJournal of Applied Physics, 2008
- Effects of molecular oxygen and ozone on polythiophene-based thin-film transistorsApplied Physics Letters, 2007
- Lifetimes of organic photovoltaics: Design and synthesis of single oligomer molecules in order to study chemical degradation mechanismsSolar Energy Materials and Solar Cells, 2006
- Unusual electromechanical effects in organic semiconductor Schottky contacts: Between piezoelectricity and electrostrictionApplied Physics Letters, 2005
- Simulation of light intensity dependent current characteristics of polymer solar cellsJournal of Applied Physics, 2004
- Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cellsJournal of Applied Physics, 2003
- Interaction of Oxygen with Conjugated Polymers: Charge Transfer Complex Formation with Poly(3-alkylthiophenes)Journal of the American Chemical Society, 1997