Design of hoeckens linkage based walking robot with MPU6050 IMU as navigation sensor
Authors:
Open Access
- 1 July 2021
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1969 (1) , 012004
Abstract
This article introduces a 4-legged walking robot using Hoeckens Linkage. In some applications, a legged robot is preferred if compared with a wheeled robot because it has a more considerable degree of freedom and can move on uneven surfaces. Hoeckens Linkage is one of the linkages that can convert rotational motion to approximate straight-line motion, which allows the robot to move faster than other linkages. This robot is designed using SolidWorks to simulate the Hoeckens linkage path, and its structure is built using 3D printed parts. Arduino Mega was used as a microcontroller to process the feedback signals so that the robot able to move in the desired pattern. The hall effect encoders were used so that DC motors always rotate with the desired RPM regardless of walking surfaces and power supplied to them. MPU 6250 gyro sensor also be used in this walking robot as a navigation sensor. Gyro sensor allows the robot to travel in a straight line or rotate a certain degree by computing yaw value from its raw data and DC motors’ control speed using a P controller. The speed average of the fabricated robot is 3.00 m/min.Keywords
This publication has 6 references indexed in Scilit:
- Development of quadruped walking robot with passive compliance legs using XL4005 buck converterJournal of Physics: Conference Series, 2021
- Development of Theo Jansen inspired all-terrain quadruped mini mobile robotJournal of Physics: Conference Series, 2021
- Design and development of a quadruped shuffling mobile robotJournal of Physics: Conference Series, 2021
- Walking Model of Jansen Mechanism-Based Quadruped Robot and Application to Obstacle AvoidanceArabian Journal for Science and Engineering, 2019
- Robot based on walking Jansen mechanismIOP Conference Series: Materials Science and Engineering, 2018
- Synthesizing reconfigurable foot traces using a Klann mechanismRobotica, 2015