Hydraulic Tomography: 3D Hydraulic Conductivity, Fracture Network, and Connectivity in Mudstone
Open Access
- 12 June 2019
- journal article
- research article
- Published by Wiley in Groundwater
- Vol. 58 (2) , 238-257
Abstract
We present the first demonstration of hydraulic tomography (HT) to estimate the three‐dimensional (3D) hydraulic conductivity ( K ) distribution of a fractured aquifer at high‐resolution field scale (HRFS), including the fracture network and connectivity through it. We invert drawdown data collected from packer‐isolated borehole intervals during 42 pumping tests in a wellfield at the former Naval Air Warfare Center, West Trenton, New Jersey, in the Newark Basin. Five additional tests were reserved for a quality check of HT results. We used an equivalent porous medium forward model and geostatistical inversion to estimate 3D K at high resolution ( K blocks 3 ), using no strict assumptions about K variability or fracture statistics. The resulting 3D K estimate ranges from approximately 0.1 (highest‐ K fractures) to approximately 10 −13 m/s (unfractured mudstone). Important estimated features include: (1) a highly fractured zone (HFZ) consisting of a sequence of high‐ K bedding‐plane fractures; (2) a low‐ K zone that disrupts the HFZ; (3) several secondary fractures of limited extent; and (4) regions of very low‐ K rock matrix. The 3D K estimate explains complex drawdown behavior observed in the field. Drawdown tracing and particle tracking simulations reveal a 3D fracture network within the estimated K distribution, and connectivity routes through the network. Model fit is best in the shallower part of the wellfield, with high density of observations and tests. The capabilities of HT demonstrated for 3D fractured aquifer characterization at HRFS may support improved in situ remediation for contaminant source zones, and applications in mining, repository assessment, or geotechnical engineering.Keywords
This publication has 59 references indexed in Scilit:
- Three‐dimensional transient hydraulic tomography in a highly heterogeneous glaciofluvial aquifer‐aquitard systemWater Resources Research, 2011
- Joint estimation of transmissivity and storativity in a bedrock fractureWater Resources Research, 2011
- The Äspö Task Force on groundwater flow and transport of solutes: bridging the gap between site characterization and performance assessment for radioactive waste disposal in fractured rocksHydrogeology Journal, 2009
- Fracture anisotropy characterization in crystalline bedrock using field-scale azimuthal self potential gradientJournal of Hydrology, 2008
- Comparison of alternative methodologies for identifying and characterizing preferential flow paths in heterogeneous aquifersJournal of Hydrology, 2007
- A methodology to interpret cross-hole tests in a granite blockJournal of Hydrology, 2006
- Combined interpretation of radar, hydraulic, and tracer data from a fractured-rock aquifer near Mirror Lake, New Hampshire, USAHydrogeology Journal, 2004
- Crosswell seismic investigation of hydraulically conductive, fractured bedrock near Mirror Lake, New HampshireJournal of Applied Geophysics, 2002
- Flow modeling and permeability estimation using borehole flow logs in heterogeneous fractured formationsWater Resources Research, 1998
- A geostatistical approach to the inverse problem in groundwater modeling (steady state) and one‐dimensional simulationsWater Resources Research, 1983