Influence of the chordwise distribution of tip winglets on the stability of a high-load compressor stage
Open Access
- 1 October 2023
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (10)
Abstract
Compressor rotor blade tip winglet technology has been confirmed to be a passive flow control method that is effective in increasing the operating stability of compressors. As revealed by extensive research, the structural parameters of tip winglets are capable of affecting their stability expansion effect, whereas their mechanism and influence law of the compressor stage remains unclear. In this study, the effect exerted by the chordwise distribution of tip winglets on the stability of a high-load compressor stage was investigated. As indicated by the result of this study, the tip winglet exhibiting a proper widest position and an adequate chordwise length can effectively increase the stall margin. To be specific, the widest position was located at 25% chord, and the stall margin was increased by up to 25.39%. A winglet exhibiting a chordwise length of 50% achieved the stability expansion ability equivalent to winglet with a full chordwise length, which can be increased by 22.58%. The tip leakage flow turned out to be weakened as the axial momentum was increased, and the circumferential momentum of the flow that arose from the tip winglet was reduced. The result of this study also suggested that tip winglets can play a certain role in combing the inflow of the stator, such that the blockage of the stator channel can be reduced.Keywords
Funding Information
- National Natural Science Foundation of China (52236005)
- Center for Basic Science of Aeroengine and Gas Turbine (P2022-B-II-007-001)
This publication has 31 references indexed in Scilit:
- Winglets for Improved Aerothermal Performance of High Pressure TurbinesJournal of Turbomachinery, 2014
- Isothermal Boundary Condition at Casing Applied to the Rotor 37 Transonic Axial Flow CompressorJournal of Turbomachinery, 2013
- Numerical Investigation of Flow Separation Control on a Highly Loaded Compressor Cascade by Plasma Aerodynamic ActuationChinese Journal of Aeronautics, 2012
- Effects of Fan Speed on Rotating Stall Inception and RecoveryJournal of Turbomachinery, 2011
- Effect of Unsteady Stator Wake—Rotor Double-Leakage Tip Clearance Flow Interaction on Time-Average Compressor PerformanceJournal of Turbomachinery, 2003
- Time-resolved flow measurements with fast-response aerodynamic probes in turbomachinesMeasurement Science and Technology, 2000
- Endwall Blockage in Axial CompressorsJournal of Turbomachinery, 1999
- The effects of propeller tip vane on flow-field behaviorExperiments in Fluids, 1997
- Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor RotorJournal of Turbomachinery, 1996
- Tip Leakage Flow in Axial CompressorsJournal of Turbomachinery, 1991