Double Coil Compensation Method for Reducing Distortion of High-Speed MFL Signals
- 3 March 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Abstract
Magnetic flux leakage (MFL) testing is widely used in the health evaluation of oil pipelines due to its non-destructive and efficient characteristics. However, motion-induced eddy currents (MIECs), which will cause distortion of the high-speed MFL signals, are generated in pipelines due to the relative motion with magnets. The distortion signals will reduce the accuracy of defect evaluation. In terms of the above issues, a double coil compensation method is proposed. Firstly, the causes, distribution positions, and diffusion characteristics of MIECs are determined through theoretical analysis to clarify the reasons for the distortion of high-speed MFL signals. Secondly, given the asymmetric distribution characteristics of MIECs, an asymmetric structure is proposed to capture MIECs at the defects and the magnetic poles, which cause distortion of high-speed MFL signals. Thirdly, based on the double coil groups, an active-passive strategy is proposed to distinguish pipeline surface and back defects, which ensures the integrity of defect evaluation and enhances the reliability of pipeline repair. Finally, the compensation performance and distinguishing capacity of the proposed method are verified by simulated and experimental analysis. The results show that compensated signals approximate the static MFL signals and have satisfactory performances of defect size quantification.Keywords
Funding Information
- National Natural Science Foundation of China (U21A20481, 62373085)
- Fundamental Research Funds for the Central Universities of China (N2404014)
- Postdoctoral Fellowship Program of China Postdoctoral Science Foundation (GZB20240128)
This publication has 26 references indexed in Scilit:
- A Physics-Guided MFL Deformed Defect Recovery MethodIEEE Transactions on Automation Science and Engineering, 2023
- Reduction of lift-off effect in pulsed eddy current testing for surface hardness classification of ferromagnetic steelMeasurement, 2022
- Structural Coupled Electromagnetic Sensing of Defects Diagnostic SystemIEEE Transactions on Industrial Electronics, 2022
- A Novel Compensation Method of Probe Gesture for Magnetic Flux Leakage TestingIEEE Sensors Journal, 2021
- Defect Detection in the Dead Zone of Magnetostrictive Sensor for Pipe MonitoringIEEE Sensors Journal, 2020
- A 2-D Radon Transformation for Enhancing the Detection and Imaging of Embedded Defects in Layered Composite Structures Using Millimeter-Wave SystemIEEE Sensors Journal, 2020
- Multi-Layer Magnetic Focusing Sensor Structure for Pulsed Remote Field Eddy CurrentIEEE Sensors Journal, 2018
- 3D simulation and experiment on high speed rail MFL inspectionNDT & E International, 2018
- Experimental study on dynamics of rotatable bypass-valve in speed control pig in gas pipelineMeasurement, 2014
- Assessment of wall thinning in insulated ferromagnetic pipes using the time-to-peak of differential pulsed eddy-current testing signalsNDT & E International, 2012