Development of organic abrasive machining system for fabricating soft x-ray ellipsoidal mirrors
Authors:
- 27 September 2019
- conference paper
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11108, 1110803
Abstract
Ellipsoidal mirrors are promising focusing devices for soft x-rays. Ellipsoidal mirrors were fabricated by our group using nickel electroforming, for which a precise master mandrel is required because the surface accuracy of the reflective surface is limited by the mandrel. The aim of this study was to develop a processing method for correcting the surface figure error of the mandrel with high spatial resolution. This method is based on loose abrasive machining with organic abrasive slurry and a small rotating tool. We call this method “Organic Abrasive Machining” (OAM). The organic particle materials are acrylic resin or urethane resin, which have excellent characteristics that include such as high dispersion, low hardness, and high washability. In the presentation, we will report the basic performance of the newly developed OAM system, including such as a stationary spot profile, surface roughness, and long-term stability of the removal rate during figure corrections. Spatial wavelength of 100 m on a rod lens was achieved, which means that the OAM could be applied for deterministic figure correction of the surface waviness of ellipsoidal mirrors.Keywords
This publication has 11 references indexed in Scilit:
- Development of electroforming process for soft x-ray ellipsoidal mirrorReview of Scientific Instruments, 2019
- Fabrication of a precise ellipsoidal mirror for soft X-ray nanofocusingReview of Scientific Instruments, 2018
- Error analysis of ellipsoidal mirrors for soft X-ray focusing by wave-optical simulationJapanese Journal of Applied Physics, 2014
- Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishingCIRP Annals, 2013
- Material removal in magnetorheological finishing of opticsApplied Optics, 2011
- Ultra-precision surface finishing by ion beam and plasma jet techniques—status and outlookNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- Removal rate model for magnetorheological finishing of glassApplied Optics, 2007
- The ??Precessions ?? tooling for polishing and figuring flat, spherical and aspheric surfacesOptics Express, 2003
- Fluid jet polishing of optical surfacesApplied Optics, 1998
- Elastic emission machiningPrecision Engineering, 1987