Determination of Hydrogen in Steel by Thermal Desorption Mass Spectrometry
Authors:
- 29 July 2010
- journal article
- process metallurgy
- Published by Wiley in Steel Research International
- Vol. 81 (7) , 499-507
Abstract
Hydrogen embrittlement has been observed since high‐strength steels have been produced in the nineteen thirties 1,2. Several different analytical methods have been developed to quantify the total and diffusible hydrogen in steel, but many aspects of hydrogen determination are still to be explored. Purely quantitative determination of hydrogen is not sufficient to fully characterize the steel regarding its resistance against embrittlement.Thermal Desorption Mass Spectrometry (TDMS) allows the investigation of hydrogen absorption and desorption mechanisms to characterize hydrogen traps in different kinds of steel microstructures. This provides valuable information for the development of new materials with a higher resistance against hydrogen embrittlement. Additionally, TDMS allows the quantitative determination of very small concentrations of hydrogen (<0.1 µg/g). Such low detection limits cannot be reached with other methods. Due to time‐consuming analysis and a rather complex construction, TDMS is usually not applied for hydrogen determination in German steel mills. The present work describes the development of a thermal desorption spectrometer at ThyssenKrupp Steel Europe AG by adapting a compact quadrupole mass spectrometer to a commercially available hot solid extraction analyzer, which has proven to be a simple and efficient solution for the determination of diffusible hydrogen in steel.Keywords
This publication has 11 references indexed in Scilit:
- Hydrogen effects on dislocation activity in austenitic stainless steelActa Materialia, 2006
- Hydrogen in Trapping States Innocuous to Environmental Degradation of High-strength SteelsISIJ International, 2003
- Hydrogen Trapping Behavior in Vanadium-added SteelISIJ International, 2003
- The thermodynamics aspects of hydrogen induced embrittlementEngineering Fracture Mechanics, 2001
- Modelling of thermal desorption of hydrogen from metalsMaterials Science and Engineering: A, 1997
- Determination of Hydrogen Concentration in Austenitic Stainless Steels by Thermal Desorption SpectroscopyMaterials Transactions, JIM, 1994
- Hydrogen detrapping from grain boundaries and dislocations in high purity ironActa Metallurgica et Materialia, 1992
- Hydrogen trapping by TiC particles in ironActa Metallurgica, 1984
- Thermal analysis of trapped hydrogen in pure ironMetallurgical Transactions A, 1982
- A quantitative analysis of hydrogen trappingMetallurgical Transactions A, 1978