Experimental and model determination of human intervertebral disc osmoviscoelasticity
Authors:
Open Access
- 7 March 2008
- journal article
- research article
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 26 (8) , 1141-1146
Abstract
Finite element (FE) models have become an important tool to study load distribution in the healthy and degenerated disc. However, model predictions require accurate constitutive laws and material properties. As the mechanical properties of the intervertebral disc are regulated by its biochemical composition and fiber‐reinforced structure, the relationship between the constitutive behavior of the tissue and its composition requires careful consideration. While numerous studies have investigated the annulus fibrosus compressive and tensile properties, specific conditions required to determine model parameters for the osmoviscoelastic model are unavailable. Therefore, the objectives of this study were (1) to complement the existing material testing in the literature with confined compression and tensile tests on human annulus fibrosus and (2) to use these data, together with existing nucleus pulposus compression data to tune a composition‐based, osmoviscoelastic material constitutive law. The osmoviscoelastic material constitutive law and the experimental data were used to describe the fiber and nonfiber properties of the human disc. The compressive material properties of normal disc tissue were Gm = 1.23 MPa, M = 1.57, and α = 1.964 × 10−16 m4/Ns; the tensile fiber material parameters were E0 = 77.0 MPa; Eε = 500 MPa, and η = 1.8 × 103 MPa−s. The goodness of fit ranged from 0.88 to 0.96 for the four experimental conditions evaluated. The constitutive law emphasized the interdependency of the strong swelling ability of the tissue and the viscoelastic nature of the collagen fibers. This is especially important for numerical models to further study the load sharing behavior with regard to disc degeneration and regeneration. © 2008 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 26:1141–1146, 2008Keywords
This publication has 33 references indexed in Scilit:
- Osmoviscoelastic finite element model of the intervertebral discEuropean Spine Journal, 2006
- Degeneration affects the fiber reorientation of human annulus fibrosus under tensile loadJournal of Biomechanics, 2006
- Confined compression experiments on bovine nucleus pulposus and annulus fibrosus: sensitivity of the experiment in the determination of compressive modulus and hydraulic permeabilityJournal of Biomechanics, 2005
- Assessment of compressive modulus, hydraulic permeability and matrix content of trypsin-treated nucleus pulposus using quantitative MRIJournal of Biomechanics, 2005
- An ionised/non-ionised dual porosity model of intervertebral disc tissueBiomechanics and Modeling in Mechanobiology, 2003
- Viscoelastic Properties of Self-Assembled Type I Collagen Fibers: Molecular Basis of Elastic and Viscous BehaviorsConnective Tissue Research, 2002
- Viscoelastic Properties of Self-Assembled Type I Collagen Fibers: Molecular Basis of Elastic and Viscous BehaviorsConnective Tissue Research, 2002
- A validation of the quadriphasic mixture theory for intervertebral disc tissueInternational Journal of Engineering Science, 1997
- Failure criterion of collagen fiber: Viscoelastic behavior simulated by using load control dataTheoretical and Applied Fracture Mechanics, 1997
- Tensile Properties of Nondegenerate Human Lumbar Anulus FibrosusSpine, 1996