Synthesis and Properties of Catalytic Chemisorbents Based on Titanium Oxide
Authors:
- 1 June 2024
- journal article
- research article
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 58 (3) , 685-691
Abstract
The synthesis and properties of catalytic chemisorbents based on titanium dioxide with ZnO and γ-Al2O3 additives were studied. The work was aimed at obtaining chemisorbents with specified performance characteristics and evaluating their potential in the reactions of hydrogenolysis of organosulfur compounds. Sulfur absorption capacity and hydrogenation ability were measured by the static carbon disulfide adsorption method. Textural and morphological characteristics were determined using X-ray powder diffraction analysis, low-temperature nitrogen adsorption–desorption, and scanning electron microscopy. It was also found that the addition of aluminum oxide did not give additional reflections in the X-ray powder diffraction pattern, in contrast to the introduction of zinc oxide. It was determined that the addition of zinc oxide significantly increased the specific surface area, which was several times greater than expected according to the additivity law. And on the contrary, the addition of aluminum oxide did not give the expected increase in the specific surface area. Both were explained through active interaction of the phases. The ratios of the components for obtaining chemisorbents with optimal strength properties were found. It was determined that the composite consisting of titanium and aluminum oxides is more resistant to sulfurization than that with zinc oxide additives. The mesoporous structure of the studied samples was confirmed by scanning electron microscopy and low-temperature nitrogen adsorption–desorption, while the sample containing γ-Al2O3 showed a more pronounced desorption branch and a surface consisting of spherical formations located in a regular order. The sample with zinc oxide had slit-like pores in its bulk. Hydrogenation of thiophene with gaseous hydrogen was carried out on the studied composites. Chromatographic analysis of the resulting product was made. It was proven that the composites based on titanium, zinc. and aluminum oxides not only can sorb organosulfur compounds, but also catalyze their hydrogenolysis. The experiment gives an insight into the synthesis and properties of catalytic chemisorbents based on titanium dioxide, emphasizing the influence of additives and their potential for reactions of reduction of organosulfur compound.Keywords
This publication has 13 references indexed in Scilit:
- Gas sensors based on TiO2 nanostructured materials for the detection of hazardous gases: A reviewNano Materials Science, 2021
- Characterization and Photocatalytic Properties of Titanium Dioxide Nanoparticles at Low Synthesis TemperaturesProceedings of the Southwest State University. Series: Engineering and Technology, 2021
- Synthesis of titanium dioxide nanotubes and their use in photocatalytic processes of catalytic purification of petroleum products from sulphur compoundsХимия в интересах устойчивого развития, 2019
- Processes for the Removal of Sulphur Dioxide from the Gaseous Emissions from Nonferrous Metallurgy Works. Technologies and CatalystsХимия в интересах устойчивого развития, 2015
- A review on fabrication, sensing mechanisms and performance of metal oxide gas sensorsJournal of Materials Science: Materials in Electronics, 2012
- Comminution and mechanochemical activation in oxide ceramics technology (review)Glass and Ceramics, 2012
- Transformations of thiophene compounds under catalytic cracking conditionsApplied Catalysis B: Environment and Energy, 2012
- Microspectroscopic insight into the deactivation process of individual cracking catalyst particles with basic sulfur componentsApplied Catalysis A: General, 2012
- Titanium dioxide in our everyday life; is it safe?Radiology and Oncology, 2011
- Extrusion Molding of Sorbents Based on Synthesized ZeoliteGlass and Ceramics, 2005