Characterization of a newly developed diaphragmless shock tube for the primary dynamic calibration of pressure meters
Authors:
- 7 September 2020
- journal article
- research article
- Published by IOP Publishing in Metrologia
- Vol. 57 (5) , 055009
Abstract
In conventional shock tubes with a diaphragm, many effects related to the burst of the diaphragm can influence shock formation, thus preventing an ideal pressure step change, as predicted by the shock tube measurement model being generated. This paper presents a newly developed diaphragmless shock tube with a quick-acting pneumatic valve, which demonstrates several advantages over conventional shock tubes with a diaphragm. The tests of the developed diaphragmless shock tube were performed using nitrogen at the atmospheric initial driven pressure, and at initial driver gauge pressures from 1 MPa to 7 MPa. The results show that the construction of the developed shock tube effectively reduces the generation of secondary shock waves and mechanical vibrations, which are often generated during the operation of shock tubes, thereby increasing the uncertainty of the shock tube calibration method. The uncertainty analysis shows that the developed diphragmless shock tube can act as a primary time-varying pressure calibration standard, generating pressure steps with a magnitude calculable from its measurement model to characterize the dynamic performance of pressure transducers with a relative expanded uncertainty of less than 0.025.Keywords
This publication has 20 references indexed in Scilit:
- Dynamic characterisation of pressure transducers using shock tube methodsJournal of Physics: Conference Series, 2018
- Dynamic modeling of liquid impulse pressure generator for calibration of pressure sensorsSensors and Actuators A: Physical, 2018
- Dynamic pressure sensitivity determination with Mach number methodMeasurement Science and Technology, 2018
- Towards traceable transient pressure metrologyMetrologia, 2018
- Mathematical modelling to support traceable dynamic calibration of pressure sensorsMetrologia, 2014
- Linking dynamic to static pressure by laser interferometryMetrologia, 2013
- Influence of the diaphragm on the metrological characteristics of a shock tubeMetrologia, 1999
- Dynamic Pressure MetrologyMetrologia, 1994
- Development of a Primary Standard for the Measurement of Dynamic Pressure and TemperatureMetrologia, 1994
- Shock waves in gasesReports on Progress in Physics, 1962