Surface integrity in electrochemical machining processes: An analysis on material modifications occurring during electrochemical machining

Authors:
Publisher website
Google Scholar
Abstract
In contrast to most other manufacturing technologies, in electrochemical machining processes only slight changes in material characteristics in the rim zone of workpieces are stated in the literature. Due to the physical active principle, no thermo-mechanically induced phase changes or the evolution of a so-called white layer were ever observed. Aside of this fact, a not inconsiderable number of smaller modifications in the rim zone were found in the past. The most common effects occurring during electrochemical machining are the generation of a passive layer on the surface by changing the local chemical composition of the material, the selective dissolution of one metallic phase, or the occurrence of flow marks. Consequently, the last two effects also change the surface roughness as the marks and dissolved phases represent ditches in the surface. Therefore, in this article, material modifications occurring during electrochemical machining are presented. Their influence on the surface integrity is exemplarily analyzed for the heat-treatable steel 42CrMo4. In addition, first steps for a correlation of material loadings that promote these changes, the so-called process signature, are made. Based on this, the influence of different machining parameters can be compared to set up rim zone properties purposefully.
Funding Information
  • German Research Foundation (SFB / TRR 136)

This publication has 14 references indexed in Scilit: