A 16Gb 18Gb/S/pin GDDR6 DRAM with per-bit trainable single-ended DFE and PLL-less clocking
Authors:
- 1 February 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 204-206
Abstract
Starting at 512Mb 6Gb/s/pin [1], GDDR5's speed and density have been steadily developing for about 10 years; recently achieving 8Gb 9Gb/s/pin [2] with per-pin timing training. Although 8Gb GDDR5X can operate at 12Gb/s [3] by increasing the burst length (BL) from 8 to 16, a degradation in system performance at a data granularity of 64B is seen. The I/O specification, using PLL clocking that additionally causes PLL jitter, has not changed much compared with GDDR5. To overcome these issues, GDDR6 introduced a dual channel for a data granularity of 32B with a BL16, per-bit training of l/REF, and an equalizer with PLL-less clocking. This paper presents a 16Gb 18Gb/s/pin GDDR6 DRAM with a die architecture and high-speed circuit techniques on 1.35V DRAM process.Keywords
This publication has 3 references indexed in Scilit:
- 23.2 A 5Gb/s/pin 8Gb LPDDR4X SDRAM with power-isolated LVSTL and split-die architecture with 2-die ZQ calibration scheme2017
- 18.1 A 20nm 9Gb/s/pin 8Gb GDDR5 DRAM with an NBTI monitor, jitter reduction techniques and improved power distribution2016
- A 60nm 6Gb/s/pin GDDR5 Graphics DRAM with Multifaceted Clocking and ISI/SSN-Reduction TechniquesIEEE International Solid-State Circuits Conference, 2008