Research on the Elastic Properties of Discontinuous Contact Wire Rope for WR‐CVT
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
Abstract
This study mainly conducts the research on the discontinuous contact elastic properties of wire rope based on WR‐CVT. The geometry model and finite element model of continuous contact and discontinuous contact of 2/3 lay pitch wire rope are established. And the contact stress distribution of the steel wire is analyzed through 5 sections and 5 contact points. The results show that on the C‐C plane, the contact stress of the discontinuous contact model is 229.4 MPa higher than that of the continuous contact, but this difference is not obvious on the D‐D plane. The contact stress nephogram is elliptical, but in the noncontact area, the shape of the contact trace shows a distinct noncomplete ellipse, and the contact trace is distributed along the spiral trajectory of the steel wire. Point 4 due to the reduction in contact area, compared with continuous contact, discontinuous contact shows a higher stress value. The geometric dimensions of the wear scars of continuous contact and discontinuous contact indicate that regardless of the length of the wear scar or the width of the wear scar, the geometric characteristics of steel wire wear mark in discontinuous contact are larger than that in continuous contact, so the discontinuous contact aggravates the surface wear of wire. This research lays a theoretical foundation for the discontinuous contact wear and fatigue of WR‐CVT wire rope and other components.Keywords
Funding Information
- Xi'an University of Science and Technology (2019YQ2-12)
- State Key Laboratory of Mechanical Transmissions (SKLMT-KFKF-201810)
This publication has 13 references indexed in Scilit:
- Tribo-fatigue behaviors of steel wire rope under bending fatigue with the variable tensionWear, 2019
- Theory and Implementation of No‐Joint Wire Rope Spatial Geometry ModelingMathematical Problems in Engineering, 2019
- Research on modeling and bending stress distribution of a new metal belt continuously variable transmissionMechanism and Machine Theory, 2017
- Interwire wear and its influence on contact behavior of wire rope strand subjected to cyclic bending loadWear, 2016
- Finite element simulation of creep of spiral strandsEngineering Structures, 2016
- Finite element modeling of fretting wear scars in the thin steel wires: Application in crossed cylinder arrangementsWear, 2014
- Finite element modeling and experimental validation of fretting wear scars in thin steel wiresWear, 2012
- A finite element model for independent wire rope core with double helical geometry subjected to axial loadsSādhanā, 2011
- Nonlinear contact-theory for analysis of wire rope strand using high-order approximation in the FEMComputers & Structures, 2011
- Computer modelling of wire strands and ropes part II: Finite element-based applicationsAdvances in Engineering Software, 2011