Impact of Minimal Silver Incorporation on Chalcopyrite Absorbers—Origins for Improved Open‐Circuit Voltages in (Ag,Cu)(In,Ga)Se2 Solar Cells
Open Access
Abstract
The influence of minimal amounts of Ag (0.5–1.4 at%) on elemental distribution and crystalline quality of (Ag,Cu)(In,Ga)Se2 (ACIGSe) absorbers grown by the three‐stage coevaporation without added alkali elements is reported. The elemental ratios affect the amount of Ag to be uniformly incorporated into the chalcopyrite absorber and the open‐circuit voltage (VOC) of the ACIGSe solar cell devices. Ag‐containing absorbers deposited at 530 °C achieve a best photoconversion efficiency of 18.2%. Due to an increased VOC, ACIGSe absorbers perform better than their Ag‐free variants at low deposition temperatures. The factors contributing to this increased VOC of low‐temperature devices are: 1) enhanced elemental Ga and In interdiffusion and hence their spatial distribution across the absorber thickness, leading to an increase in the minimum bandgap, 2) an improved absorber crystalline quality with larger grains resulting in high quasi‐Fermi‐level splitting and lower nonradiative losses. The photoluminescence data obtained on the ACIGSe absorbers reveal the corresponding variations in their bandgap and photoluminescence quantum yield. These material‐level insights into Ag incorporation in chalcopyrite help to advance the development of chalcopyrite‐based tandem solar cells, which—so far—is limited by the requirement of high deposition temperatures.Keywords
This publication has 46 references indexed in Scilit:
- Efficiency Boost of (Ag0.5,Cu0.5)(In1‐x,Gax)Se2 Thin Film Solar Cells by Using a Sequential Process: Effects of Ag‐Front Grading and Surface Phase EngineeringAdvanced Energy Materials, 2023
- Solar Energy in Space Applications: Review and Technology PerspectivesAdvanced Energy Materials, 2022
- Near surface defects: Cause of deficit between internal and external open‐circuit voltage in solar cellsProgress in Photovoltaics: Research and Applications, 2021
- A Comprehensive Perspective on the Fabrication of CuGaSe2/Si Tandem Solar CellsEnergy Technology, 2021
- How band tail recombination influences the open‐circuit voltage of solar cellsProgress in Photovoltaics: Research and Applications, 2021
- Flexible and Semi‐Transparent Ultra‐Thin CIGSe Solar Cells Prepared on Ultra‐Thin Glass Substrate: A Key to Flexible Bifacial Photovoltaic ApplicationsAdvanced Functional Materials, 2020
- Wide‐gap (Ag,Cu)(In,Ga)Se2 solar cells with different buffer materials—A path to a better heterojunctionProgress in Photovoltaics: Research and Applications, 2020
- Advanced Alkali Treatments for High‐Efficiency Cu(In,Ga)Se2 Solar Cells on Flexible SubstratesAdvanced Energy Materials, 2019
- Effect of Crystal Orientation and Conduction Band Grading of Absorber on Efficiency of Cu(In,Ga)Se2 Solar Cells Grown on Flexible Polyimide Foil at Low TemperatureAdvanced Energy Materials, 2018
- Progress in thin film CIGS photovoltaics – Research and development, manufacturing, and applicationsProgress in Photovoltaics: Research and Applications, 2016