Kinetics and mechanistic analysis of caustic magnesia hydration
- 22 June 2004
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 79 (8) , 816-821
Abstract
The kinetics of magnesia hydration to produce magnesium hydroxide is crucial for process design and control, and for the production of an Mg(OH)2 powder with desirable particle morphology. In this study, highly pure magnesia has been hydrated in a batch reactor. The effects of the following variables were evaluated experimentally: temperature (308–363 K), reaction time (0.5–5 h), initial slurry density (1–25%wt) and particle size in the ranges −212 + 75 µm and −45 + 38 µm. Experimental data indicate increasing magnesia hydration rates with increasing temperature, as expected. In addition, it has been observed that the hydration of magnesia increases significantly up to about 4–5%wt initial slurry density, stabilising afterwards. On the other hand, the reaction was almost unaffected when magnesia with different particle sizes were hydrated because of similar specific surface areas involved. A reaction mechanism to explain the oxide dissolution and the hydroxide precipitation has been proposed, assuming no significant change in the initial solids size and dissolution rate as the controlling step. The calculated activation energy value of 62.3 kJ mol−1 corroborates the mechanism proposed in this study and compares well with values previously reported in the literature. Copyright © 2004 Society of Chemical IndustryKeywords
This publication has 9 references indexed in Scilit:
- Utilization of Magnesium Hydroxide Produced by Magnesia Hydration as Fire Retardant for Nylon 6-6,6Polímeros, 2001
- A simplified mechanistic analysis of the hydration of magnesiaThe Canadian Journal of Chemical Engineering, 2001
- On the kinetics of magnesia hydration in magnesium acetate solutionsJournal of Chemical Technology & Biotechnology, 1999
- Application of Magnesium Hydroxide as a Flame Retardant and Smoke Suppressant in ElastomersRubber Chemistry and Technology, 1988
- Magnesia—An important Industrial Mineral: A Review of Processing Options and UsesMineral Processing and Extractive Metallurgy Review, 1985
- Dissolution and hydration kinetics of MgOSurface Technology, 1985
- The kinetics and mechanism of the hydration of magnesium oxide in a batch reactorThe Canadian Journal of Chemical Engineering, 1969
- Kinetics of vapour phase hydration of magnesium oxide. Part 2.—Dependence on temperature and water vapour pressureTransactions of the Faraday Society, 1965
- Kinetics of Vapor‐Phase Hydration of Magnesium OxideJournal of the American Ceramic Society, 1963