Experimental investigation and numerical simulation of three-point bending fatigue of 3D orthogonal woven composite
Authors:
- 18 April 2012
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 103 (12) , 1312-1327
Abstract
This paper reports the three-point bending fatigue behavior of three-dimensional (3D) orthogonal woven composite (3DOWC) in experimental and finite element analysis (FEA) approach. In experimental, the S–N curve was obtained to illustrate the relationship between applied stress levels and number of cycles to failure. The stiffness variation was recorded to present the degradation of mechanical properties of the 3DOWC during the process of fatigue loading. Furthermore, the fatigue damage morphologies of the tested 3DOWC coupons were given to indicate the damage modes of different parts (resin, yarns, and their interface) of the composite under the range of stress levels. In FEA approach, a user-defined material subroutine UMAT which characterizes the stiffness matrix and fatigue damage evolution of the 3DOWC was developed and incorporated with a finite element code ABAQUS/Standard to calculate the maximum deflection of the 3DOWC during each loading cycle. The bending deformation at different loading cycles was also calculated. From the comparisons between FEA and experimental approaches, it is indicated that the proposed model is reasonable for calculating the fatigue bending deformation.Keywords
This publication has 9 references indexed in Scilit:
- Fatigue and post-fatigue tensile behaviour of non-crimp stitched and unstitched carbon/epoxy compositesComposites Science and Technology, 2010
- Fatigue behavior of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass reinforced compositesComposites Science and Technology, 2010
- Tension fatigue of fibre-dominated and matrix-dominated laminates reinforced with z-pinsInternational Journal of Fatigue, 2010
- Tensile fatigue properties of 3D composites with through-thickness reinforcementComposites Science and Technology, 2008
- Flexural properties of z-pinned laminatesComposites Part A: Applied Science and Manufacturing, 2007
- Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tensionComposites Part A: Applied Science and Manufacturing, 2006
- Comparison of the fatigue behaviour of 2-D and 3-D woven fabric reinforced compositesJournal of Materials Processing Technology, 1995
- On fatigue damage accumulation and material degradation in composite materialsComposites Science and Technology, 1989
- How to use damage mechanicsNuclear Engineering and Design, 1984