In‐situ microfibrillar PET/iPP blend via slit die extrusion, hot stretching, and quenching: Influence of hot stretch ratio on morphology, crystallization, and crystal structure of iPP at a fixed PET concentration
Authors:
- 30 September 2004
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 42 (22) , 4095-4106
Abstract
The in situ microfibrillar blend of poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) was fabricated through a slit die extrusion, hot stretch, and quenching process. The morphological observation indicates that while the unstretched blend appears to be a common incompatible morphology, the hot stretched blends present PET in situ fibers whose characteristics, such as diameter and aspect ratio, are dependent on the hot stretching ratio (HSR). When the HSR is low, the elongated dispersed phase particles are not uniform at all. As the HSR is increased to 16.1, well‐defined PET microfibers were generated in situ, whose diameter is rather uniform and is around 0.6 ∼ 0.9 μm. The presence of the PET phase shows significant nucleation ability for crystallization of iPP. Higher HSR corresponds to faster crystallization of the iPP matrix, while as HSR is high up to a certain level, its variation has little influence on the onset and maximum crystallization temperatures of the iPP matrix during cooling from melt. Optical microscopy observation reveals that transcrystalline layers form in the microfibrillar blend, in which the PET microfibers play as the center row nuclei. In the as‐stretched microfibrillar blends, small‐angle X‐ray scattering measurements show that matrix iPP lamellar crystals have the same orientation as PET lamella. The long period of lamellar crystals of iPP is not affected by the presence of PET micofibers. Wide‐angle X‐ray scattering reveals that the β phase of iPP is obtained in the as‐stretched blends, whose concentration increases with the increase of the HSR. This suggests that finer PET microfibers can promote the occurrence of the β phase. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4095–4106, 2004Keywords
This publication has 55 references indexed in Scilit:
- Shear-Induced Smectic Ordering as a Precursor of Crystallization in Isotactic PolypropyleneMacromolecules, 2003
- Tensile properties of poly(ethylene terephthalate) and polyethylene in-situ microfiber reinforced composite formed via slit die extrusion and hot-stretchingMaterials Letters, 2002
- Effects of cooling rate on crystallinity of i-polypropylene and polyethylene terephthalate crystallized in nonisothermal conditionsJournal of Polymer Science Part B: Polymer Physics, 1999
- Modification of nylon‐polyethylene blends via in situ fiber formationPolymer Engineering & Science, 1998
- Improving poly(ethylene terephthalate)/high‐density polyethylene blends by using graft copolymersPolymer Engineering & Science, 1996
- Fractionated crystallization in polyolefins–nylon 6 blendsJournal of Applied Polymer Science, 1994
- Factors influencing the formation of elongated morphologies in immiscible polymer blends during melt processingPolymer Engineering & Science, 1993
- Transcrystallized interphase in thermoplastic compositesJournal of Materials Science, 1992
- Kinetics of polymer crystallization from the melt (calorimetric approach)Journal of Polymer Science: Polymer Physics Edition, 1974
- Crystallization kinetics of isotactic polypropyleneJournal of Polymer Science, 1959