Smarttag: An Indoor Positioning System Based on Smart Transmit Power Scheme Using Active Tags
Open Access
- 9 April 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 6, 23500-23510
Abstract
There are no large-scale deployments to navigate the people indoor environments as the GPS for outdoor environments. Though, high accurate rate indoor localization has been considered the potential research areas by both academia and industry in last decade. These indoor localization research studies are divided into two groups in the literature which are reader-based and tag-based systems. Most of these studies are reader-based. These readers and tags can determine received signal strength levels of the signal using radio frequency technology. We present a tag-based and cost-effective indoor localization system using NRF24L series radio modules. Different from the available tag-based systems, we propose smart transmit power scheme run in the tags called SmartTag. The SmartTag provides communication with the nearest reader using different power levels. However, existing tag-based methods require the RSSI information to achieve high localization accuracy. Our proposed system eliminates RSSI information with the SmartTag. We have developed a simulation of the prototype system, and we used Monte Carlo simulations in many different scenarios. We have also implemented the system prototype and conducted in an actual indoor environment to demonstrate the performance of the SmartTag by comparing with the Monte Carlo simulations. From the indoor experimental results, we confirm that the detections of room and objects are accurate and positioning accuracy is improved thanks to the SmartTag localization. If we briefly summarize our work, we have determined the position in indoor environments by communicating with the nearest reader in the medium thanks to the scheme on the SmartTag.Keywords
This publication has 25 references indexed in Scilit:
- Wireless residential power monitoring system2017
- RSS-based indoor positioning utilizing Firefly algorithm in Wireless Sensor networks2016
- An Iterative Weighted KNN (IW-KNN) Based Indoor Localization Method in Bluetooth Low Energy (BLE) Environment2016
- Design and implementation Raspberry Pi-based omni-wheel mobile robot2015
- A Comprehensive Study of Bluetooth Fingerprinting-Based Algorithms for Localization2013
- 3D Passive Tag Localization Schemes for Indoor RFID Applications2010
- Path loss exponent estimation in large wireless networks2009
- Indoor Localization Using Multiple Wireless Technologies2007
- Influence of Predicted and Measured Fingerprint on the Accuracy of RSSI-based Indoor Location Systems2007
- Indoor Localization With Probability Density Functions Based on Bluetooth2006