Experimental study on the embedment strength of smooth dowels inserted in cross-laminated timber narrow side
Authors:
Open Access
- 5 August 2022
- journal article
- research article
- Published by Springer Nature in Journal of Wood Science
- Vol. 68 (1) , 1-18
Abstract
The embedment properties of the dowel-type fasteners is a fundamental parameter that can determine the shear resisting performance of the connections utilized in cross-laminated timber (CLT) structures. To investigate the embedment strength of the smooth dowels inserted in CLT narrow side, totally 504 CLT embedment specimens were tested to evaluate the effects of the influencing factors on the embedment strength, which included the loading angle, the embedment angle, the embedment position, the diameter of the dowels, and the gaps between the lumbers. The existing predictive equations of the embedment strength were validated based on the experimental results, and modified empirical equations were proposed for a more accurate prediction on the average embedment strength. It is found that when the loading direction with a loading angle of 90 degree is parallel to the adhesive layer, for the dowels embedded in the core layer and for those embedded between layers, the average embedment strength decreases by 27.89% and by 33.61% with an increase of the diameter from 8 to 24 mm, respectively. When the loading direction is perpendicular to the adhesive layer, the average embedment strength of the smooth dowels with an embedment angle of 90 degree is 85.25–218.96% higher than that of the dowels with an embedment angle of 0 degree. Furthermore, almost no drop can be identified for the embedment strength of the dowels with an embedment angle of 0 degree when the gap exists in their embedment position. A more accurate prediction on the average embedment strength can be achieved based on the modified empirical equations.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFD1101001)
- CSCEC R&D Project (CSCEC-2021-Z-40)
- National Natural Science Foundation of China (52108242)
This publication has 16 references indexed in Scilit:
- Embedment strength of smooth dowel-type fasteners in cross-laminated timberConstruction and Building Materials, 2020
- Effects of embedment side and loading direction on embedment strength of cross-laminated timber for smooth dowelsEuropean Journal of Wood and Wood Products, 2020
- Influence of number of layers on embedment strength of dowel-type connections for glulam and cross-laminated timberEngineering Structures, 2018
- Seismic behaviour of Cross-Laminated Timber structures: A state-of-the-art reviewEngineering Structures, 2018
- Cross laminated timber (CLT): Design approaches for dowel-type fasteners and connectionsEngineering Structures, 2018
- New criteria for the determination of the parallel-to-grain embedment strength of woodConstruction and Building Materials, 2018
- Performance evaluation of multi-storey cross-laminated timber structures under different earthquake hazard levelsJournal of Wood Science, 2017
- Grain angle and temperature effect on embedding strengthConstruction and Building Materials, 2017
- Shear behavior of cross-laminated timber wall consisting of small panelsJournal of Wood Science, 2016
- A Comparison Between the EN 383 and ASTM D5764 Test Methods for Dowel‐Bearing Strength Assessment of Wood: Experimental and Numerical InvestigationsStrain, 2010