Development of a Novel Railway Positioning System Using RFID Technology
Open Access
Abstract
Currently, a number of positioning systems are in use to locate trains on the railway network; but these generally have limited precision. Thus, this paper focuses on testing and validating the suitability of radio frequency identification (RFID) technology, for aligning vehicles to switch and crossing (S&C) positions on the railway network. This offers the possibility of accurately knowing the position of vehicles equipped with monitoring equipment, such as the network rail track recording vehicle (TRV), and aligning the data with reference to the locations of the S&C (and ideally to key elements within a particular S&C). The concept is to install two tags, one on the switch-toe sleeper and the second on the crossing-nose sleeper, with an RFID reader that will be installed underneath the vehicle. Thus, the key features of the S&C, the switch toe and crossing nose, will be considered as a definitive reference point for the inspection vehicle’s position. As a monitoring vehicle passes over a piece of S&C, the proposed positioning system will provide information about this S&C’s ID, which is stored inside the RFID tags and will indicate the S&C’s GPS coordinates. As part of the research in this paper, more than 400 tests have been performed to investigate two different RFID technologies, passive and semi-passive, tested in a variety of conditions: including different passage speeds, different distances between the RFID reader and the tags, and varied strength signal transmitted between the reader and the tags. Based on lab testing and analysis of the recorded data, it is concluded that passive RFID technology is the most suitable of the two technologies. The conclusions find that the proposed RFID-based solution can offer a more precise positioning solution to be a reference point for the train location within the network.Keywords
Funding Information
- Shift2Rail programme that is a Joint Undertaking (In2Track2 project, sub-task 1.2.1 titled as; extension of operation, control and maintenance for enhanced S&C)
This publication has 14 references indexed in Scilit:
- Performance and power consumption analysis of low-cost single board computers in educational roboticsIFAC-PapersOnLine, 2019
- Track circuit reliability assessment for preventing railway accidentsSafety Science, 2018
- A model-scale study to assess the influence of ground geometries on aerodynamic flow development around a trainProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2016
- Eurobalise-Train communication modelling to assess interferences in railway control signalling systemsNetwork Protocols and Algorithms, 2016
- Railway axle counter prototype2014
- Survey of RFID applications in railway industry2014
- A precise and reliable train positioning system and its use for automation of train operation2013
- Complementarity between Axle Counters and Tracks Circuits2011
- FORMS/FORMAT 20102011
- A map matching approach for train positioning. II. Application and experimentationIEEE Transactions on Vehicular Technology, 2000