Direct printed silver nanowire thin film patterns for flexible transparent heaters with temperature gradients
Authors:
- 30 October 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (119) , 98412-98418
Abstract
In this study, a convenient and facile direct printing method is developed to fabricate patterned silver nanowire (AgNW) thin films. An aqueous silver nanowire (AgNW) ink was first formulated and inkjet printed on flexible substrates with precisely controlled AgNW density per unit area. With a mesh grid structure, the printed heater showed high electrical conductivity and transparency up to 90%. From infrared thermography, a steady-state temperature up to 100 °C was observed uniformly over the printed mesh grid heater with only 4 volts of applied voltage. With precise control on local resistances via AgNW density variation, a gradient heater was designed and printed directly to provide a temperature gradient of up to 10 °C cm−1. When printed on thin polyethylene terephthalate (PET) sheets, the printed heater can have a fast response time within 3 s due to the thermal insulating nature of PET. The printed heaters on PET also showed great mechanical stability and the resistances remained almost the same after 1000 bending cycles.Keywords
This publication has 31 references indexed in Scilit:
- Thermal Response of Transparent Silver Nanowire/PEDOT:PSS Film HeatersSmall, 2014
- Large-size graphene microsheets as a protective layer for transparent conductive silver nanowire film heatersCarbon, 2014
- Versatile graphene nanocomposite microheater patterning for various thermoplastic substrates based on capillary filling and transfer moldingApplied Physics Letters, 2013
- High-Performance Graphene-Based Transparent Flexible HeatersNano Letters, 2011
- Graphene as Transparent Electrode Material for Organic ElectronicsAdvanced Materials, 2011
- Thickness-dependent thermal resistance of a transparent glass heater with a single-walled carbon nanotube coatingCarbon, 2011
- The manufacture of a transparent film heater by spinning multi-walled carbon nanotubesCarbon, 2011
- Efficiency Enhancement of Organic Solar Cells Using Transparent Plasmonic Ag Nanowire ElectrodesAdvanced Materials, 2010
- Roll-to-roll production of 30-inch graphene films for transparent electrodesNature Nanotechnology, 2010
- Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cellsElectrochemistry Communications, 2008