Surface cross-linked thermoplastic starch with different UV wavelengths: mechanical, wettability, hygroscopic and degradation properties
Authors:
Open Access
- 18 December 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (73) , 44815-44823
Abstract
Here, we report a method to improve the properties of thermoplastic starch (TPS) by surface ultraviolet (UV) cross-linking. TPS sheets were prepared by injection molding and coated with an ethanol solution of photo-initiator TPO (2,4,6-trimethyl benzoyl diphenyl phosphine oxide), then, irradiated by UV with different wavelengths for 15 min. Untreated and irradiated TPS sheets were characterized using tensile and bending tests, impact tests, dynamic mechanical thermal analysis (DMTA) and infrared spectroscopy (FTIR). FTIR spectra showed that UV irradiation can effectively trigger surface cross-linking of TPS sheets. The mechanical and dynamic mechanical properties of the TPS were improved and the optimized properties were obtained by 308 nm UV irradiation. A tensile strength of 4.1 MPa, a bending strength of 2.7 MPa, an impact strength of 96.8 kJ m−2, and the corresponding activation energy of 251.22 kJ mol−1 were obtained. The water contact angle and moisture absorption of the samples were also investigated and the 308 nm UV irradiated sheets have a contact angle of 74°. Moisture absorption rate as a function of the square root of time showed a sigmoid curve including a linear stage which conforms to Fick's second law. The samples irradiated by 308 nm UV had the lowest equilibrium moisture absorption rate M∞ and the longest time T0 to enter into the Fick's diffusion stage and the lowest slope K and diffusion coefficient D. All samples displayed biodegradable properties when buried in soil. This method has potential applications for agricultural mulch films, packing and medical film products.Keywords
Funding Information
- Natural Science Foundation of Jiangsu Province (BK20140967)
This publication has 33 references indexed in Scilit:
- Photoinitiator Influence on the Photo-crosslink Property in Polyurea MicrocapsulesJournal of Photopolymer Science and Technology, 2009
- Biocomposites of cellulose reinforced starch: Improvement of properties by photo-induced crosslinkingBioresource Technology, 2008
- Surface photo-crosslinking of corn starch sheetsCarbohydrate Polymers, 2008
- Polímeros biodegradáveis - uma solução parcial para diminuir a quantidade dos resíduos plásticosQuímica Nova, 2006
- The effect of plasticizers on thermoplastic starch compositions obtained by melt processingCarbohydrate Polymers, 2006
- Interaction between dry starch and plasticisers glycerol or ethylene glycol, measured by differential scanning calorimetry and solid state NMR spectroscopyCarbohydrate Polymers, 2003
- Solid state photocrosslinked starch based films: a new family of homogeneous modified starchesCarbohydrate Polymers, 2002
- An infrared investigation in relation with chitin and chitosan characterizationPolymer, 2001
- Cross-linking of wheat starch and hydroxypropylated wheat starch in alkaline slurry with sodium trimetaphosphateCarbohydrate Polymers, 1997
- Gelatinization and Retrogradation Characteristics of Hydroxypropylated and Cross‐linked RicesJournal of Food Science, 1993