Double‐Layer‐Stacked One Diode‐One Resistive Switching Memory Crossbar Array with an Extremely High Rectification Ratio of 109
- 17 May 2017
- journal article
- research article
- Published by Wiley in Advanced Electronic Materials
- Vol. 3 (7)
Abstract
A double‐layer‐stacked 1 diode‐1 resistor (1D1R) cross‐bar array (CBA) resistance switching random access memory is fabricated. The TiO2‐based Schottky diode and the unipolar resistance switching TiO2 comprise the cell selector and nonvolatile memory components, respectively. All the fabrication processes are performed near room temperature through physical vapor deposition processes, and the performance degradation by the thermal budget is well suppressed. As a result, a rectification ratio as high as 1.4 × 109 is achieved from the appropriately cycled diode, which can last up to 108 cycles in the integrated structure. Such highly promising performance is confirmed from both the upper and lower memory layers, which confirm the possible route for the multistacked memory structure. The two‐bit‐per‐cell operation allows an effective minimum cell area of F2, which is confirmed from the randomly accessed cells to be completely free from adverse interference through the adoption of an extremely‐high‐performance diode. The present 1D1R integration technique will eventually allow the fabrication of an extremely high‐integration‐density (above 1 Gb per block) CBA with the help of the two‐port sensing scheme. Such a high‐performance CBA device is a feasible contender for memory‐dominant computation.Keywords
Funding Information
- Ministry of Science, ICT and Future Planning (NRF‐2014R1A2A1A10052979)
- National Research Foundation of Korea
This publication has 28 references indexed in Scilit:
- Prepare dispersed CIS nano-scale particles and spray coating CIS absorber layers using nano-scale precursorsDiscover Nano, 2014
- High‐Performance and Low‐Power Rewritable SiOx 1 kbit One Diode–One Resistor Crossbar Memory ArrayAdvanced Materials, 2013
- Self-Selection Unipolar $\hbox{HfO}_{x}$ -Based RRAMIEEE Transactions on Electron Devices, 2012
- Optimization of Chemical Structure of Schottky-Type Selection Diode for Crossbar Resistive MemoryACS Applied Materials & Interfaces, 2012
- High Current Density and Nonlinearity Combination of Selection Device Based on TaOx/TiO2/TaOx Structure for One Selector–One Resistor ArraysACS Nano, 2012
- Avoiding fatal damage to the top electrodes when forming unipolar resistance switching in nano-thick material systemsJournal of Physics D: Applied Physics, 2012
- A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O5−x/TaO2−x bilayer structuresNature Materials, 2011
- Nanofilamentary resistive switching in binary oxide system; a review on the present status and outlookNanotechnology, 2011
- A theoretical model for Schottky diodes for excluding the sneak current in cross bar array resistive memoryNanotechnology, 2010
- High‐Current‐Density CuO x/InZnOx Thin‐Film Diodes for Cross‐Point Memory ApplicationsAdvanced Materials, 2008