New Water Soluble Anionic NVP Acrylamide Terpolymers for Use in Harsh EOR Conditions
Authors:
- N. GaillardNGN. Gaillard
- B. GiovannettiBGB. Giovannetti
- C. FaveroCFC. Favero
- 12 April 2014
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Water soluble anionic polymers are widely used as Mobility Control agents in EOR. However, their shear, salt, free radical and thermal stability limit their domain of application. A joint industrial effort has led to new optimized polymer compositions. The chemical structure has been designed to improve long term thermal and salt stability. The functional groups on the polymer chain are acrylamide (AM), sodium acrylate (AA), sodium acrylamido-tertiary-butyl sulfonate (ATBS) and N-vinyl pyrrolidone (NVP). The composition of the different groups was varied to produce different polymer prototypes. The bulk gel polymerization process used to produce at industrial scale EOR polymers has been fine-tuned using NMR structural analysis at different conversion rates. The best polymer candidates were submitted to stability tests. Thermal stability was investigated with residual oxygen between 0 and 200ppb at temperature up to 120°C and salinity up to 70 g/L TDS with high hardness. Results show that the joint presence of NVP and ATBS in specific amounts in the polymer structure improves thermal and salt stability. Some of the polymers, whose chemical structure was optimized to maximize stability, could withstand harsh reservoir conditions with little loss of viscosity for an aging time of at least 1 year. These species were then submitted to coreflood experiments and showed good propagation properties in a 100-150 mD carbonate rock. Results show that polymer flooding can be successful in reservoirs with high temperature and harsh salinity conditions. The thermal resistant polymers can be used for polymer, surfactant polymer floods and are promising for alkaline surfactant polymer systems as well. They may be beneficial to other oil and gas applications where heat and salt stability are needed. With this technology, polymer viscosity is stable while it propagates through the reservoir and a favorable mobility ratio is maintained from injectors to producers.Keywords
This publication has 18 references indexed in Scilit:
- The Polymer Flooding Technique Applied at High Water Cut Stage in Daqing Oilfield2013
- Polymer Flooding in a Large Field in South Oman - Initial Results and Future Plans2012
- Rheology and Transport of Improved EOR Polymers under Harsh Reservoir Conditions2012
- Chemical EOR Pilot in Mangala Field: Results of Initial Polymer Flood Phase2012
- Polymer Flooding a ~500-cp Oil2012
- Pushing the Envelope for Polymer Flooding Towards High-temperature and High-salinity Reservoirs with Polyacrylamide Based Ter-polymers2011
- Economics of Field Proven Chemical Flooding Technologies2008
- Commercial Polymer Injection in the Courtenay Field, 1994 Update1994
- Polymer-Improved Oil Recovery1991
- Chemical Stability of Polyacrylamide Under Simulated Field Conditions1985