Dilute Donor Organic Solar Cells Based on Non-fullerene Acceptors
- 24 May 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (22) , 28958-28968
Abstract
The advent of small molecule non-fullerene acceptor (NFA) materials for organic photovoltaic (OPV) devices has led to a series of breakthroughs in performance and device lifetime. The most efficient OPV devices have a combination of electron donor and acceptor materials that constitute the light absorbing layer in a bulk heterojunction (BHJ) structure. For many BHJ-based devices reported to date, the weight ratio of donor to acceptor is near equal. However, the morphology of such films can be difficult to reproduce and manufacture at scale. There would be an advantage in developing a light harvesting layer for efficient OPV devices that contains only a small amount of either the donor or acceptor. In this work we explore low donor content OPV devices composed of the polymeric donor PM6 blended with high performance NFA materials, Y6 or ITIC-4F. We found that even when the donor:acceptor weight ratio was only 1:10, the OPV devices still have good photoconversion efficiencies of around 6% and 5% for Y6 and ITIC-4F, respectively. It was found that neither charge mobility nor recombination rates had a strong effect on the efficiency of the devices. Rather, the overall efficiency was strongly related to the film absorption coefficient and maintaining adequate interfacial surface area between donor and acceptor molecules/phases for efficient exciton dissociation.Keywords
Funding Information
- Australian Renewable Energy Agency
- University of Queensland
This publication has 51 references indexed in Scilit:
- A Polycrystalline Polymer Donor as Pre‐Aggregate toward Ordered Molecular Aggregation for 19.3% Efficiency Binary Organic Solar CellsAdvanced Materials, 2023
- Compromising Charge Generation and Recombination of Organic Photovoltaics with Mixed Diluent Strategy for Certified 19.4% EfficiencyAdvanced Materials, 2023
- Efficient Hole Transfer via Delocalized Excited State in Small Molecular Acceptor: A Comparative Study on Photodynamics of PM6:Y6 and PM6:ITIC Organic Photovoltaic BlendsAdvanced Functional Materials, 2021
- Recent Advances in Morphology Optimization for Organic PhotovoltaicsAdvanced Materials, 2018
- Increased Open‐Circuit Voltage of Organic Solar Cells by Reduced Donor‐Acceptor Interface AreaAdvanced Materials, 2014
- Balanced Carrier Mobilities: Not a Necessary Condition for High‐Efficiency Thin Organic Solar Cells as Determined by MIS‐CELIVAdvanced Energy Materials, 2013
- Solution‐Processed Fullerene‐Based Organic Schottky Junction Devices for Large‐Open‐Circuit‐Voltage Organic Solar CellsAdvanced Materials, 2012
- A Narrow Optical Gap Small Molecule Acceptor for Organic Solar CellsAdvanced Energy Materials, 2012
- Bulk Heterojunction Photovoltaic Cells with Low Donor ConcentrationAdvanced Materials, 2011
- Accounting for Interference, Scattering, and Electrode Absorption to Make Accurate Internal Quantum Efficiency Measurements in Organic and Other Thin Solar CellsAdvanced Materials, 2010