Modeling and Analysis of Crosstalk Induced Effects in Multiwalled Carbon Nanotube Bundle Interconnects: An ABCD Parameter-Based Approach
- 1 January 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 14 (2) , 259-274
Abstract
In this paper, the crosstalk effects in both small and large diameter multiwalled carbon nanotube bundle interconnects (MWCNTs) for the future nanoscale integrated circuits are studied with the help of ABCD parameter matrix approach for global levels of interconnects at 22- and 14-nm technology nodes. Here, isolated MWCNTs are modeled using an equivalent single conductor transmission line. The simulation results show that the results are at par with the result of SPICE model. It is observed that performance wise, the large diameter MWCNT bundles are better than both small diameter MWCNT bundles and copper wire for both repeated and unrepeated interconnects. The same trend is observed with the number of inserted repeaters. For repeated wires, the optimized placement of repeaters offsets the delay advantage numbers of MWCNT bundles over copper wire. Technology scaling adversely impacts the delay advantage numbers of small diameter MWCNT bundles. As far as the worst-case crosstalk noise peak voltage is concerned, the large diameter MWCNT bundles also outperform both small diameter MWCNT bundles and copper wire for longer interconnects. However, for shorter interconnects, copper wire and small diameter bundles outclass the large diameter bundles due to their relatively larger time constant. We have compared our crosstalk analysis results with the earlier work to justify the validity of our proposed model and observed that the results with our model are in well conformity with the existing work. It is seen that even the tall Cu vias are not going to significantly affect the performance of MWCNT bundle interconnects. Twice the minimum width global level interconnects are the optimal choice to achieve the maximum delay advantage using MWCNT bundle interconnects in comparison with Cu-based interconnects. Finally, our analysis shows that from the performance and signal integrity perspective, the large diameter MWCNT bundles are a suitable alternative to both small diameter MWCNT bundles and copper interconnects for future integrated circuit technology generations.Keywords
Funding Information
- DIT, Government of West Bengal, India
This publication has 38 references indexed in Scilit:
- Unified model for analyzing timing delay and crosstalk effects in Carbon Nanotube interconnects2012
- Fast Waveform Estimation (FWE) for Timing AnalysisIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2010
- Decoupled victim model for the analysis of crosstalk noise between on-chip coupled interconnects2009
- Expression of Concern: On the Optimal Design, Performance, and Reliability of Future Carbon Nanotube-Based Interconnect SolutionsIEEE Transactions on Electron Devices, 2008
- Electrical and thermal transport in metallic single-wall carbon nanotubes on insulating substratesJournal of Applied Physics, 2007
- Modeling of metallic carbon-nanotube interconnects for circuit simulations and a comparison with Cu interconnects for scaled technologiesIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2005
- Multichannel Ballistic Transport in Multiwall Carbon NanotubesPhysical Review Letters, 2005
- Analysis of on-chip inductance effects for distributed RLC interconnectsIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2002
- Single-walled carbon nanotube electronicsIEEE Transactions on Nanotechnology, 2002
- Reliability and current carrying capacity of carbon nanotubesApplied Physics Letters, 2001