Design, Dynamic Analysis, and Experimental Evaluation of a Hybrid Parallel–Serial Polishing Machine With Decoupled Motions
- 3 June 2021
- journal article
- research article
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (6)
Abstract
In this paper, a novel six degrees-of-freedom (DOF) hybrid kinematic machine (HKM) is designed, analyzed, and evaluated for precision polishing. The design adopts a 3-DOF tripod-based parallel mechanism (PM) to locate the workpiece, a 2-DOF serial mechanism (SM) to orient the polishing tool, and a functional extension limb to provide a redundant DOF when polishing the workpieces with axially symmetrical shapes. Compared with the existing HKMs, the most distinctive feature is that the position and orientation adjustments of the tool with respect to the workpiece are decoupled during the synchronous machining, thus allowing the rotational tool center point (RTCP) function to be conveniently realized. For the developed HKM, the kinematics are studied systematically, including position, velocity, acceleration, and workspace. The dynamic model of the PM is derived by employing the principle of virtual work. For a pre-defined trajectory, the required driving forces are obtained through dynamic simulation. Based on these analyses, a laboratory prototype of the HKM is designed and developed. A preliminary accuracy assessment of the HKM is implemented with a double ball-bar, and a series of polishing experiments are conducted to show the capacity and feasibility of the developed HKM.Keywords
Funding Information
- Innovation and Technology Commission - Hong Kong (GHP/031/13SZ)
This publication has 45 references indexed in Scilit:
- Manufacturing and measurement of freeform opticsCIRP Annals, 2013
- Inverse dynamics of a 3-PRC parallel kinematic machineNonlinear Dynamics, 2011
- Parasitic motion comparison of 3-PRS parallel mechanism with different limb arrangementsRobotics and Computer-Integrated Manufacturing, 2011
- Design of a 3-DOF PKM module for large structural component machiningMechanism and Machine Theory, 2010
- Process optimization of the serial-parallel hybrid polishing machine tool based on artificial neural network and genetic algorithmJournal of Intelligent Manufacturing, 2010
- Modeling and control of automated polishing/deburring process using a dual-purpose compliant toolheadInternational Journal of Machine Tools and Manufacture, 2008
- Stiffness analysis for a 3-PUU parallel kinematic machineMechanism and Machine Theory, 2008
- Integrated Design Toolbox for Tripod-Based Parallel Kinematic MachinesJournal of Mechanical Design, 2006
- The ??Precessions ?? tooling for polishing and figuring flat, spherical and aspheric surfacesOptics Express, 2003
- Kinematic Analysis of 3-DOF Position Mechanisms for Use in Hybrid Kinematic MachinesJournal of Mechanical Design, 2002