Interfacial Delamination at Multilayer Thin Films in Semiconductor Devices
Authors:
Open Access
- 14 July 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (29) , 25219-25228
Abstract
With the evolution of semiconducting industries, thermomechanical failure induced in a multilayered structure with a high aspect ratio during manufacturing and operation has become one of the critical reliability issues. In this work, the effect of thermomechanical stress on the failure of multilayered thin films on Si substrates was studied using analytical calculations and various thermomechanical tests. The residual stress induced during material processing was calculated based on plate bending theory. The calculations enabled the prediction of the weakest region of failure in the thin films. To verify our prediction, additional thermomechanical stress was applied to induce cracking and interfacial delamination by various tests. We assumed that, when accumulated thermomechanical-residual and externally applied mechanical stress becomes larger than a critical value the thin-film cracking or interfacial delamination will occur. The test results agreed well with the prediction based on the analytical calculation in that the film with maximum tensile residual stress is the most vulnerable to failure. These results will provide useful analytical and experimental prediction tools for the failure of multilayered thin films in the device design stage.Keywords
Funding Information
- Samsung
- Yonsei University
This publication has 42 references indexed in Scilit:
- Thermal expansion coefficient and thermomechanical properties of SiNx thin films prepared by plasma-enhanced chemical vapor depositionApplied Optics, 2012
- Development of Ultrafast Laser Flash Methods for Measuring Thermophysical Properties of Thin Films and Boundary Thermal ResistancesJapanese Journal of Applied Physics, 2011
- Investigation of the delamination mechanism of the thin film dielectric structure in flip chip packagesMicroelectronic Engineering, 2010
- Thermomechanical Stress Analysis of Multi-Layered Electronic PackagingJournal of Electronic Packaging, 2003
- Interfacial adhesion and its degradation in selected metal/oxide and dielectric/oxide interfaces in multi-layer devicesVacuum, 2000
- A four-point bending technique for studying subcritical crack growth in thin films and at interfacesJournal of Materials Research, 1997
- Influence of substrates on the elastic reaction of films for the microindentation testsThin Solid Films, 1996
- Interstitial Nitrides1996
- The thermomechanical integrity of thin films and multilayersActa Metallurgica et Materialia, 1995
- The measurement of thermal expansion coefficient of tungsten at elevated temperaturesJournal of Physics E: Scientific Instruments, 1969