Structure and tribological behavior of CrAlCN coating in artificial seawater
Authors:
- Peng ZhangPZPeng Zhang
- Lei ShanLSLei Shan
- Ying TianYTYing Tian
- Xiaolei SuXSXiaolei Su
- Liang LuoLLLiang Luo
- Jianmin ChenJCJianmin Chen
- 27 August 2021
- journal article
- research article
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 9 (3) , 035028
Abstract
This study examined the tribological behavior of CrAlCN coatings on 316 l stainless steel and TC4 alloy sliding against Si 3 N 4 ball in seawater. The coatings were systematically investigated by XRD, XPS, SEM, TEM and EDS. The mechanical and tribological properties were analyzed by nano indentation test and tribometer, respectively. The results showed that the coating contained CrN, CrC, AlN and amorphous ( α –C) phases. The nanocrystalline was surrounded by α –C phases. The hardness of CrAlCN coatings on both substrates was about 21 GPa. The CrAlCN coating on TC4 had the highest Open Circuit Potential, lowest corrosive current density and wear rate, indicating that it had the best wear resistance and corrosion resistance in seawater.Keywords
Funding Information
- Zhejiang Provincial Natural Science Foundation of China (LGG21E050009)
- National Natural Science Foundation of China (51605433)
This publication has 33 references indexed in Scilit:
- Doping carbon to improve the tribological performance of CrN coatings in seawaterTribology International, 2015
- Tribological and electrochemical performances of Cr/CrN and Cr/CrN/CrAlN multilayer coatings deposited by RF magnetron sputteringTribology International, 2015
- Corrosion and cathodic protection of carbon steel in the tidal zone: Products, mechanisms and kineticsCorrosion Science, 2015
- Microstructure, optical and electrical properties of CrAlN film as a novel material for high temperature solar selective absorber applicationsMaterials Letters, 2014
- Friction and wear properties of TiN, TiAlN, AlTiN and CrAlN PVD nitride coatingsInternational Journal of Refractory Metals and Hard Materials, 2012
- Characteristics of PVD-CrAlSiN films after post-coat heat treatments in nitrogen atmosphereApplied Surface Science, 2011
- Microstructural characterisation of carbon doped CrAlTiN nanoscale multilayer coatingsSurface and Coatings Technology, 2011
- Composition, microstructure, and properties of CrNx films deposited using medium frequency magnetron sputteringApplied Surface Science, 2011
- Effects of nitrogen pressure and pulse bias voltage on the properties of Cr–N coatings deposited by arc ion platingSurface and Coatings Technology, 2010
- Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and airWear, 2008