A Framework for the Analysis of Thermal Losses in Reciprocating Compressors and Expanders
Open Access
- 5 February 2014
- journal article
- research article
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 35 (16-17) , 1435-1449
Abstract
This article presents a framework that describes formally the underlying unsteady and conjugate heat transfer processes that are undergone in thermodynamic systems, along with results from its application to the characterization of thermodynamic losses due to irreversible heat transfer during reciprocating compression and expansion processes in a gas spring. Specifically, a heat transfer model is proposed that solves the one-dimensional unsteady heat conduction equation in the solid simultaneously with the first law in the gas phase, with an imposed heat transfer coefficient taken from suitable experiments in gas springs. Even at low volumetric compression ratios (of 2.5), notable effects of unsteady heat transfer to the solid walls are revealed, with thermally induced thermodynamic cycle (work) losses of up to 14% (relative to the work input/output in equivalent adiabatic and reversible compression/expansion processes) at intermediate Péclet numbers (i.e., normalized frequencies) when unfavorable solid and gas materials are selected, and closer to 10–12% for more common material choices. The contribution of the solid toward these values, through the conjugate variations attributed to the thickness of the cylinder wall, is about 8% and 2% points, respectively, showing a maximum at intermediate thicknesses. At higher compression ratios (of 6) a 19% worst-case loss is reported for common materials. These results suggest strongly that in designing high-efficiency reciprocating machines the full conjugate and unsteady problem must be considered and that the role of the solid in determining performance cannot, in general, be neglected.Keywords
This publication has 27 references indexed in Scilit:
- The role of heat exchange on the behaviour of an oscillatory two-phase low-grade heat engineApplied Thermal Engineering, 2013
- Dynamic modelling of a two-phase thermofluidic oscillator for efficient low grade heat utilization: Effect of fluid inertiaApplied Energy, 2012
- A dynamic model for the efficiency optimization of an oscillatory low grade heat engineEnergy, 2011
- An examination of exergy destruction in organic Rankine cyclesInternational Journal of Energy Research, 2008
- A thermoacoustic-Stirling heat engine: Detailed studyThe Journal of the Acoustical Society of America, 2000
- System design of orifice pulse-tube refrigerator using linear flow network analysisCryogenics, 1996
- Free Piston Stirling Engines1985
- An intrinsically irreversible thermoacoustic heat engineThe Journal of the Acoustical Society of America, 1983
- A pistonless Stirling engine—The traveling wave heat engineThe Journal of the Acoustical Society of America, 1979
- The operation of the Fluidyne heat engine at low differential temperaturesJournal of Sound and Vibration, 1979