Comparison of Measurement Techniques for Gate Shortening in Sub-Micrometer Metal Oxide Semiconductor Field Effect Transistors
Authors:
- Pradeep BhattacharyaPBPradeep Bhattacharya
- Mohammad BariMBMohammad Bari
- Krishnaraj RaoKRKrishnaraj Rao
- 1 August 1993
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 32 (8R) , 3409-3413
Abstract
In this paper, various methods of evaluating the electrical channel length change (or gate shortening) as a result of applied gate voltage in sub-micrometer metal oxide semiconductor field effect transistors (MOSFETs) are investigated and the method best suited for such short channel length devices is reported. Studies were performed on n-channel transistors (n-MOSFETs) fabricated using X-ray and optical lithography and having channel lengths in the range of 0.4 to 4 µm and 1.5 to 10 µm respectively. The effective channel lengths were extracted from the current-voltage (I-V) measurements. The measurements were made for different low and high sets of gate voltages. In comparing various methods it was found that the method due to Terada and Muta, and Chern et al. gave accurate results consistently for short channel MOSFETs, whereas the Whitfield method gave accurate results only for larger channel length MOSFETs. The accuracy of the Whitfield method is sensitive to applied gate voltage during I-V measurements. The Peng and Afromowitz method is unsuitable for finding the effective channel length of sub-micrometer MOSFETs especially if the MOSFETs have high values of external resistance.Keywords
This publication has 7 references indexed in Scilit:
- Measuring the effective channel length of MOSFETsIEEE Circuits and Devices Magazine, 1990
- Application of synchrotron x-ray lithography to fabricate fully scaled 0.5 μm complementary metal–oxide semiconductor devices and circuitsJournal of Vacuum Science & Technology B, 1989
- Generation and annealing of defects in silicon dioxideJournal of Applied Physics, 1987
- A modification on "An improved method to determine MOSFET channel length"IEEE Electron Device Letters, 1985
- An improved method to determine MOSFET channel lengthIEEE Electron Device Letters, 1982
- A new method to determine MOSFET channel lengthIEEE Electron Device Letters, 1980
- A New Method to Determine Effective MOSFET Channel LengthJapanese Journal of Applied Physics, 1979