Research on Tribological Characteristics of Hard Metal WC-Co Tools with TiAlN and CrN PVD Coatings for Processing Solid Oak Wood
Open Access
Abstract
The article presents research results that demonstrate the impacts of mechanical and tribological characteristics on the efficiency of cutting tools made from hard metal WC-Co. Uncoated tools and tools coated with physical vapor deposition (PVD) coatings (CrN and TiAlN) were tested. The thickness of coatings was determined, and tests of roughness, microhardness, and adhesion were performed. The coefficient of friction (COF) was established by different methods, and the wear of the tested cutters which occurs during the milling of solid oak wood, and the impact of this on surface roughness, were determined. The results revealed that uncoated WC-Co cutters are the least resistant to wear, while cutters coated with chromium nitride (CrN) are the most resistant. Both PVD coatings were damaged in the 9050 m in area of the cutting edge.Keywords
This publication has 43 references indexed in Scilit:
- Behaviour of PVD Coatings in the Turning of Austenitic Stainless SteelsProcedia Engineering, 2013
- Corrosion mechanisms in the wood industry, especially caused by tanninsMaterials and Corrosion, 2009
- Comparative studies on microstructure and mechanical properties of CrN, Cr–C–N and Cr–Mo–N coatingsJournal of Materials Processing Technology, 2007
- Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatingsSurface and Coatings Technology, 2006
- Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramicsJournal of Materials Processing Technology, 2005
- Structure and properties of cathodic arc ion plated CrN coatings for copper machining cutting toolsSurface and Coatings Technology, 2004
- A study on corrosion resistance characteristics of PVD Cr-N coated steels by electrochemical methodSurface and Coatings Technology, 2002
- CrxNy hard coatings deposited with PVD method on tools for wood machiningSurface and Coatings Technology, 2000
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- The development of the PVD coating TiAlN as a commercial coating for cutting toolsSurface and Coatings Technology, 1991