Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method
Open Access
- 26 November 2021
- journal article
- research article
- Published by Springer Nature in Computational Mechanics
- Vol. 69 (3) , 825-845
Abstract
Selective laser melting is receiving increasing interest as an additive manufacturing technique. Residual stresses induced by the large temperature gradients and inhomogeneous cooling process can favour the generation of cracks. In this work, a crystal plasticity finite element model is developed to simulate the formation of residual stresses and to understand the correlation between plastic deformation, grain orientation and residual stresses in the additive manufacturing process. The temperature profile and grain structure from thermal-fluid flow and grain growth simulations are implemented into the crystal plasticity model. An element elimination and reactivation method is proposed to model the melting and solidification and to reinitialize state variables, such as the plastic deformation, in the reactivated elements. The accuracy of this method is judged against previous method based on the stiffness degradation of liquid regions by comparing the plastic deformation as a function of time induced by thermal stresses. The method is used to investigate residual stresses parallel and perpendicular to the laser scan direction, and the correlation with the maximum Schmid factor of the grains along those directions. The magnitude of the residual stress can be predicted as a function of the depth, grain orientation and position with respect to the molten pool. The simulation results are directly comparable to X-ray diffraction experiments and stress–strain curves.Keywords
Funding Information
- Ministry of Education, Singapore (Academic Research Fund Tier 2 (MOE-T2EP50120-0012))
This publication has 68 references indexed in Scilit:
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performanceInternational Journal of Fatigue, 2013
- Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: Finite element simulationInternational Journal of Pressure Vessels and Piping, 2012
- Thermodynamically consistent phase‐field models of fracture: Variational principles and multi‐field FE implementationsInternational Journal for Numerical Methods in Engineering, 2010
- Residual stresses in selective laser sintering and selective laser meltingRapid Prototyping Journal, 2006
- Binding mechanisms in selective laser sintering and selective laser meltingRapid Prototyping Journal, 2005
- Finite-strain thermoelasticity based on multiplicative decomposition of deformation gradient2002
- Modelling of addition of filler material in large deformation analysis of multipass weldingCommunications in Numerical Methods in Engineering, 2001
- Strain localization in ductile single crystalsJournal of the Mechanics and Physics of Solids, 1977
- Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticityJournal of the Mechanics and Physics of Solids, 1971
- Elastic-Plastic Deformation at Finite StrainsJournal of Applied Mechanics, 1969