10.9 A 23.2-to-26GHz Sub-Sampling PLL Achieving 48.3fsrms Jitter, -253.5dB FoMJ, and 0.55μs Locking Time Based on a Function-Reused VCO-Buffer and a Type-I FLL with Rapid Phase Alignment
Authors:
- 18 February 2024
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 67, 204-206
Abstract
Emerging high-speed wireless communications utilizing the mm-wave band put stringent jitter requirements on local oscillators (LOs), e.g., $\lt97$ fs at 26GHz for 5G FR2 using 256-QAM, which demands a power-hungry PLL. To reduce the power consumption of the mobile terminal, the duty-cycled operation offered by 3GPP can be utilized. However, to support the ultra-reliable low-latency communication (URLLC), the receiver must frequently detect a possible scheduling grant occupying a short symbol width that can be down to $6.3 \mu \mathrm{s}$ for a mm-wave band using a high-frequency subcarrier of 120kHz. If a PLL can robustly lock within sub-$\mu \mathrm{s}$, it can be turned off between scheduled receiving times for significant power and energy saving. One straightforward solution for generating low-jitter mm-wave LOs is combining sub-10GHz PLLs with frequency multipliers [1]. However, although equipped with harmonic-extraction techniques to reduce the cost of the frequency multiplier, the PLLs in [2] and [3] still need power- and area-hungry buffers for boosting the output power and suppressing the subharmonic spurs, limiting their ${\mathrm {FoM}}_{{\mathrm {J}}}$. Alternatively, the sub-sampling (SS) PLL [4] is a promising candidate for directly synthesizing an mm-wave LO since its inherent low in-band phase noise (PN) enables a wide bandwidth to suppress the VCO PN. Nevertheless, the SSPLL suffers from an inferior reference (ref.) spur and the effort to improve the isolation between the VCO and sub-sampling phase detector (SSPD) [5] impairs jitter, ${\mathrm {FoM}}_{{\mathrm {J}}}$, and area. Furthermore, fulfilling the switched-capacitor (SC) search and loop settling robustly within sub-$\mu \mathrm{s}$ is challenging for the SSPLL using an SSPD with a small capture range.
Keywords
Funding Information
- Technology Development
This publication has 6 references indexed in Scilit:
- A 25.8GHz Integer-N PLL With Time-Amplifying Phase-Frequency Detector Achieving 60fsrms Jitter, -252.8dB FoMJ, and Robust Lock Acquisition Performance2022
- 17.6 A 21.7-to-26.5GHz Charge-Sharing Locking Quadrature PLL with Implicit Digital Frequency-Tracking Loop Achieving 75fs Jitter and −250dB FoM2020
- 16.2 A 76fsrms Jitter and –40dBc Integrated-Phase-Noise 28-to-31GHz Frequency Synthesizer Based on Digital Sub-Sampling PLL Using Optimally Spaced Voltage Comparators and Background Loop-Gain Optimization2019
- 16.8 A 25.4-to-29.5GHz 10.2mW Isolated Sub-Sampling PLL Achieving -252.9dB Jitter-Power FoM and -63dBc Reference Spur2019
- An Ultra-Low Power 1.7-2.7 GHz Fractional-N Sub-Sampling Digital Frequency Synthesizer and Modulator for IoT Applications in 40 nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- A Low Noise Sub-Sampling PLL in Which Divider Noise is Eliminated and PD/CP Noise is Not Multiplied by $N ^{2}$IEEE Journal of Solid-State Circuits, 2009