Nucleating Effect of Carbon Nanoparticles and Their Influence on the Thermal and Chemical Stability of Polypropylene
Open Access
- 1 January 2012
- journal article
- research article
- Published by Wiley in Journal of Nanomaterials
- Vol. 2012 (1)
Abstract
The effect of carbon nanofibers (CNFs) and carbon nanotubes (CNTs) on the thermal and chemical stability of polypropylene (PP) when subjected to oxidation in a strong acid medium was studied. The effect of CNFs and CNTs on the crystalline morphology and the melting and crystallization temperatures was also studied. The thermal stability increased markedly; the decomposition temperature, for example, increased from 293∘C for pure PP to 312 and 320∘C for PP with CNFs and CNTs, respectively. The crystallization temperature increased perceptibly with the addition of CNTs or CNFs, from 107∘C for pure PP to 112 and 114∘C for PP with CNFs and CNTs, respectively. The oxidative degradation with nitric acid produced a reduction in molecular weight; however, this negative effect was less pronounced in the PP compositions with carbon nanoparticles. After 8 hours in nitric acid, this reduction was from 141,000 to 68,000 (for pure PP), to 75,000 (for PP‐CNFs), and 79,500 (for PP‐CNTs). X‐ray diffraction showed that the alpha type crystallinity remains, irrespective of the nucleating agent. Finally, the intensity ratio between the (040) (at 16.7∘) and the (110) (at 13.9∘) reflections increased, which was taken as an indication of an increasing nucleating efficiency.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación
This publication has 32 references indexed in Scilit:
- Nonisothermal Crystallization Kinetics and Microhardness of PP/CNT CompositesJournal of Macromolecular Science, Part B, 2008
- Isotactic Polypropylene/Carbon Nanotube Composites Prepared by Latex Technology. Thermal Analysis of Carbon Nanotube-Induced NucleationMacromolecules, 2008
- Effect of different compatibilisers on nanoclay dispersion, thermal stability, and burning behavior of polypropylene–nanoclay blendsJournal of Applied Polymer Science, 2008
- Crystalline Structure and Properties of Carbon Nanofiber Composites Prepared by Melt ExtrusionMacromolecular Chemistry and Physics, 2007
- Thermal and tensile properties of aligned carbon nanofiber reinforced polypropyleneMaterials Letters, 2007
- The Control of Thermal and Radiation Stability of Polypropylene Containing Calcium Carbonate NanoparticlesMacromolecular Symposia, 2006
- Morphological studies of polypropylene–nanoclay compositesJournal of Applied Polymer Science, 2005
- Effect of clay orientation on the tensile modulus of polypropylene–nanoclay compositesPolymer, 2004
- Crystallization and orientation studies in polypropylene/single wall carbon nanotube compositePolymer, 2003
- Degradation and Stabilization of Low-density Polyethylene Films used as Greenhouse Covering MaterialsJournal of Agricultural Engineering Research, 2000