Effect of Intercritical Annealing on the Properties of Dual Phase Steel via Finite Element Method
Open Access
- 25 April 2023
- journal article
- research article
- Published by SDU Journal of Natural and Applied Sciences in SDÜ Fen Bilimleri Enstitüsü Dergisi
- Vol. 27 (1) , 103-106
Abstract
Dual phase (DP) steels are rapidly becoming more and more popular for automotive applications. They offer a weight reduction with a combination of energy absorption for crash zones. Rails, reinforcements, back panels, cross members, and pillars can be given as application examples. DP steels microstructure consists of a soft ferrite matrix with hard martensite islands. The hard martensite islands provide strength while the ductile ferrite provides formability. The strength level of DP steel is related to the amount of martensite in the microstructure, and the martensite amount can be arranged via intercritical annealing. In this work, thermodynamic analysis of St52 steel was carried out with Thermo-Calc software. A1 and A3 temperatures were determined by calculating the temperature-dependent phase fractions. Intercritical annealing temperatures were determined according to the calculated critical temperatures (A1 and A3). The intercritical annealing process was modelled by using Simheat NxT software. In this modelling and simulation work, the effect of intercritical annealing temperature on the final microstructure and hardness of DP steel was investigated.Keywords
This publication has 21 references indexed in Scilit:
- Influence of the heat treatment path on the martensite phase and dry reciprocating wear behavior of dual-phase steelsMetallurgical Research & Technology, 2016
- An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided DesignAnnual Review of Materials Research, 2015
- Processing of Bimodal Grain-Sized Ultrafine-Grained Dual Phase Microalloyed V-Nb Steel with 1370 MPa Strength and 16 pct Uniform Elongation Through Warm Rolling and Intercritical AnnealingMetallurgical and Materials Transactions A, 2014
- Influence of Volume Fraction and Distribution of Martensite Phase on the Strain Localization in Dual Phase SteelsProcedia Materials Science, 2014
- Microstructure Control during Fabrication of Ultrafine Grained Dual-phase Steel: Characterization and Effect of Intercritical Annealing ParametersISIJ International, 2012
- Affect of the tempering temperature on the microstructure and mechanical properties of dual phase steelsMaterials Science and Engineering: A, 2012
- Effect of grain refinement to 1μm on strength and toughness of dual-phase steelsMaterials Science and Engineering: A, 2010
- Effect of intercritical annealing parameters on dual phase behavior of commercial low-alloyed steelsJournal of Iron and Steel Research International, 2010
- Effect of chemical composition, martensite volume fraction and tempering on tensile behaviour of dual phase steelsMaterials Letters, 2009
- Microalloying of Cold-Formable Multi Phase Steel GradesMaterials Science Forum, 2005