Molecular and Thermal Characterization of a Nearly Perfect Isotactic Poly(propylene)
- 21 October 2015
- journal article
- research article
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 216 (22) , 2171-2178
Abstract
The structure formation upon cooling of the quiescent melt of a nearly defect‐free isotactic poly(propylene) (iPP) homopolymer is investigated in this study. This iPP, having a molecular weight of 1 × 106 g mol−1 and a narrow molecular weight distribution, has been produced with a C2 symmetric hafnocene complex. Information about the crystallization kinetics is collected in a broad range of cooling rates. Standard differential scanning calorimetry is used for cooling rates in the range 3–100 °C min−1 and FSC is employed to analyze the solidification process at cooling rates larger than 100 °C s−1. The near absence of regio‐ and stereo‐defects allows this iPP to crystallize at significantly high temperatures and to form crystals at cooling rates higher than commonly observed for standard Ziegler–Natta iPP. The data reveal that the iPP homopolymer with close‐to‐perfect stereo‐regularity form crystals at high cooling rates as, e.g., α‐nucleated iPP. The defect‐free polymer chain allows the formation of relatively thick lamellar crystals which resulted in a relatively high tensile modulus of 2088 ± 8 MPa. imageKeywords
This publication has 44 references indexed in Scilit:
- Investigation of the crystallization behavior of isotactic polypropylene polymerized with different Ziegler‐Natta catalystsJournal of Applied Polymer Science, 2013
- Nucleation and Crystallization of Low Isotatic Polypropylenes with Statistically Distributed StereoerrorsPolymer Journal, 2009
- Influence of isotacticity and molecular weight on the properties of metallocenic isotactic polypropyleneEuropean Polymer Journal, 2007
- Crystallization Behavior and Mechanical Properties of Regiodefective, Highly Stereoregular Isotactic Polypropylene: Effect of Regiodefects versus Stereodefects and Influence of the Molecular MassMacromolecules, 2005
- Comparison between Polymorphic Behaviors of Ziegler−Natta and Metallocene-Made Isotactic Polypropylene: The Role of the Distribution of Defects in the Polymer ChainsMacromolecules, 2004
- Crystallization Rates of Matched Fractions of MgCl2-Supported Ziegler Natta and Metallocene Isotactic Poly(Propylene)s. 1. The Role of Chain MicrostructureMacromolecules, 2003
- The effects of atacticity, comonomer content, and configurational defects on the equilibrium melting temperature of monoclinic isotactic polypropyleneJournal of Applied Polymer Science, 2001
- Thermal behaviour of polypropylene fractions: 1. Influence of tacticity and molecular weight on crystallization and melting behaviourPolymer, 1993
- Polymorphism in isotactic polypropyleneProgress in Polymer Science, 1991
- DSC studies of tactic polypropylenes: The correlation of polymer stereochemistry with thermal propertiesJournal of Applied Polymer Science, 1990