Thermomechanical Characterization of Superelastic Ni-Ti SMA Helical Extension Springs Manufactured by Investment Casting
Open Access
- 1 January 2019
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Abstract
Shape memory alloy (SMA) helical springs are special mechanical parts that require a previous evaluation of its behavior for application. Therefore, in this paper thermal and mechanical behaviour of superelastic Ni-Ti SMA helical extension springs manufactured by investment casting (IC) are evaluated. Phase transformation temperatures were measured by Electrical Resistance as a function of Temperature (ERT) and Differential Scanning Calorimetry (DSC). Tensile tests were carried out within strain and temperatures ranges. The pitch angle and stiffness of each spring were determined. Results demonstrated that Ni-Ti SMA helical springs produced by IC presented phase transformation corresponding to the superelastic effect (SE). The reversible deformations under tensile test were of the order of 70%. The mechanical behavior as function of temperature revealed a linear relationship between maximum force and spring temperature.Keywords
This publication has 27 references indexed in Scilit:
- A Transforming Metal Nanocomposite with Large Elastic Strain, Low Modulus, and High StrengthScience, 2013
- Phase transformation characteristics and mechanical characterization of nitinol synthesized by laser direct depositionMaterials Science and Engineering: A, 2013
- Engineering design framework for a shape memory alloy coil spring actuator using a static two-state modelSmart Materials and Structures, 2012
- Shape Memory Alloy Tension/Compression Device for Seismic Retrofit of BuildingsJournal of Materials Engineering and Performance, 2009
- Fabrication of shape memory alloys using the plasma skull push–pull processJournal of Materials Processing Technology, 2009
- TIPS AND TRICKS FOR CHARACTERIZING SHAPE MEMORY ALLOY WIRE: PART 2-FUNDAMENTAL ISOTHERMAL RESPONSESExperimental Techniques, 2009
- Influence of investment type and sprue number on the casting accuracy of titanium crown marginsThe Journal of Prosthetic Dentistry, 2006
- Estimation of Internal Stresses in Shape Memory Wires during Thermal Cycling under Constant Load: A Macromechanical ApproachJournal of Intelligent Material Systems and Structures, 2000
- The Electric Resistance of Shape Memory Alloys in the Pseudoelastic RegimeJournal de Physique IV, 1997
- Effect of thermal cycling on the transformation temperatures of TiNi alloysActa Metallurgica, 1986