Effects of shot peening pressure, media type and double shot peening on the microstructure, mechanical and tribological properties of low-alloy steel
- 14 October 2016
- journal article
- research article
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 4 (4) , 045001
Abstract
The effects of different shot peening conditions such as pressure (from 68.9–551.6 kPa), media type (media S230 and S110) and double shot peening on the microstructure, mechanical and tribological properties of shot peened AISI 4340 low-alloy steels, were systematically investigated. Their surface topography, hardness and roughness were analyzed by scanning electron microscopy, a Vickers micro-hardness tester and surface profilometer, respectively, while the cross-sectional sub-surface structures of the as-received and shot peened samples were characterized by means of optical microscopy and nanoindentation. The tribological properties were determined by using a ball-on-disc micro-tribological tester. It was shown that shot peening pressure and media type had a significant effect on the surface roughness, hardness, microstructure, wear resistance and friction of the shot peened AISI 4340 steel samples. It also indicated that the double shot peening process was a promising treatment, not only to reduce the surface roughness of the material after undergoing the first shot peening process with large media and high intensity, but to improve the tribological properties of the shot peened material.Keywords
This publication has 18 references indexed in Scilit:
- Mechanical and Tribological Properties of Shot-Peened SAE 1070 SteelTribology Transactions, 2016
- Fatigue behavior of notched steel specimens with nanocrystallized surface obtained by severe shot peeningMaterials & Design (1980-2015), 2013
- Prediction and characterization of residual stresses from laser shock peeningInternational Journal of Fatigue, 2012
- Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peeningEngineering Fracture Mechanics, 2012
- Improvement of Fatigue Strength of Maraging Steel by Shot PeeningMaterials and Manufacturing Processes, 2009
- Review of shot peening processes to obtain nanocrystalline surfaces in metal alloysSurface Engineering, 2009
- INFLUENCE OF SHOT PEENING ON SURFACE CHARACTERISTICS OF HIGH-SPEED STEELSInternational Journal of Modern Physics B, 2008
- Change in Microstructure and Mechanical Properties of Steel Components Surface LayerTetsu-to-Hagane, 2008
- Oberflächenbehandlung durch Kugelstrahlen und Festwalzen*Materials Testing, 2007
- Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviourMaterials Science and Engineering: A, 1996