Restart strategy for sensorless PMSM drive system based on zero‐voltage vector
Authors:
Open Access
- 15 September 2020
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (12) , 2362-2369
Abstract
The zero‐voltage vector (ZVV) method is widely employed to restart a free‐running permanent magnet synchronous machine (PMSM) stably in a sensorless drive system due to its simple implementation. However, in the conventional method, it is hard to determine the action time and interval time of ZVV pulses, which may result in overcurrent. Moreover, the estimation accuracy is susceptible to current measurement noise. To cope with these problems, an enhanced ZVV method based on two feedback loops is proposed. With the proposed strategy, an inner closed loop is constructed to regulate the action time of the ZVV pulse by keeping the current amplitude at the reference value, which prevents the overcurrent. Meanwhile, the reference value of the current amplitude is adjusted automatically based on the outer loop to determine a suitable interval time of the ZVV pulse. Furthermore, the phase‐locked loop technique is exploited to extract rotor speed and position. The feasibility of the proposed method is verified under simulation and experimental results with a 5.5 kW sensorless PMSM drive system.Keywords
This publication has 22 references indexed in Scilit:
- Analysis of parasitic effects in carrier signal injection methods for sensorless control of PM synchronous machinesIET Electric Power Applications, 2018
- Optimisation of HF signal injection parameters for EV applications based on sensorless IPMSM drivesIET Electric Power Applications, 2017
- Flying start and sensorless control of permanent magnet wind power generator using induced voltage measurement and phase-locked loopElectric Power Systems Research, 2017
- Flying Start of a Permanent Magnet Wind Power Generator Based on a Discontinuous Converter Operation Mode and a Phase-Locked LoopIEEE Transactions on Industrial Electronics, 2017
- Carrier signal injection‐based sensorless control for permanent magnet synchronous machine drives with tolerance of signal processing delaysIET Electric Power Applications, 2017
- Sensorless control of interior permanent magnet synchronous motor: An overview and design study2017
- Load disturbance observer‐based control method for sensorless PMSM driveIET Electric Power Applications, 2016
- Universal Restart Strategy for High-Inertia Scalar-Controlled PMSM DrivesIEEE Transactions on Industry Applications, 2016
- Three-Phase PLLs: A Review of Recent AdvancesIEEE Transactions on Power Electronics, 2016
- Starting Procedure of Rotational Sensorless PMSM in the Rotating ConditionIEEE Transactions on Industry Applications, 2009