Microstructural Evolution and Properties of ZrB2‐Reinforced AA6111 Aluminum Matrix Composites Subjected to Double‐Sided Friction Stir Processing
Authors:
- 29 January 2025
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (5)
Abstract
Single‐sided friction stir processing (S‐FSP), owing to its intrinsic structural characteristics, including the advancing side and the retreating side and the nonuniformity of attributes, restricts the enhancement of the strength of aluminum composite materials. Herein, the preparation of AA6111/ZrB2 aluminum matrix composites, 4 mm in thickness, via an in situ autogenous casting process is presented. The composites undergo double‐sided FSP (D‐FSP) with varying parameters, utilizing an orthogonal test method. In these findings, it is indicated that the mean grain size of the nugget zone (NZ) post D‐FSP is reduced from 5.56 μm in S‐FSP to 4.65 μm, the percentage of low‐angle grain boundaries diminishes from 31.4% to 26.9%, and the recrystallized structure escalates from 49.7% to 65.2%. At a rotational speed of 1000 r min−1 and a processing speed of 40 mm min−1, the average hardness of the NZ of D‐FSP is augmented by 6.3% relative to S‐FSP; the ultimate tensile strength and elongation of the material are enhanced by 1.6% and 31.7%, respectively, compared to S‐FSP, while the product of strength and elongation is increased by 33.2%.Keywords
Funding Information
- National Natural Science Foundation of China (51605206)
This publication has 49 references indexed in Scilit:
- Study on Friction Properties of In Situ Synthesized (AlB2 + Al2O3)/A356 CompositeJournal of Materials Engineering and Performance, 2023
- Microstructure and Creep Properties of In situ ZrB2/AA6016 Composites Assisted by Ultrasonic treatmentInternational Journal of Metalcasting, 2023
- Study on the Microstructure and Mechanical Properties of ZrB2/AA6111 Particle-Reinforced Aluminum Matrix Composites by Friction Stir Processing and Heat TreatmentInternational Journal of Metalcasting, 2023
- Improving local formability of 6xxx and 7xxx aluminum alloy sheets using friction stir processingThe International Journal of Advanced Manufacturing Technology, 2022
- Analysis of Residual Stresses and Dislocation Density of AA6082 Butt Welds Produced by Friction Sir WeldingMetallurgical and Materials Transactions A, 2022
- Study on Microstructure Evolution and Strengthening and Toughening of Friction Stir Processed AA6082-4%Al3Zr In-Situ CompositesJournal of Materials Engineering and Performance, 2022
- Method for Determining Crystal Grain Size by X‐Ray DiffractionCrystal Research and Technology, 2018
- Friction stir processing – State of the artArchives of Civil and Mechanical Engineering, 2018
- Continuous dynamic recrystallization (CDRX) model for aluminum alloysJournal of Materials Science, 2017
- Microstructural Homogeneity and Hot Deformation of Various Friction-Stir-Processed 5083 Al AlloysJournal of Materials Engineering and Performance, 2016