An Electrochemical Method to Assess the Chromium Volatility of Chromia-Forming Metallic Interconnect for SOFCs
- 1 January 2006
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 153 (11) , A2120-A2125
Abstract
The polarization behavior of (La0.8Sr0.2)0.9MnO3(La0.8Sr0.2)0.9MnO3 (LSM) electrodes in contact with different chromia-forming alloys including a Ni–Cr-based superalloy (R600), and ferritic stainless steels (RA446 and Crofer22 APU) was studied under solid oxide fuel cell (SOFC) operating conditions. The magnitude of the polarization potential increase, ΔEΔE , depended on the composition and microstructure of the oxide scale formed on the alloy surface. Crofer22 APU alloy showed the lowest ΔEΔE change as a function of the cathodic polarization time among the chromia-forming alloys studied. This is most likely due to the formation of the dense and void-free oxide scale and the (Cr,Mn)3O4(Cr,Mn)3O4 spinel phase formed in the top layer of the oxide scale decreases the chromium volatility of the scale. The result demonstrates the feasibility of the electrochemical polarization method in the qualitative diagnosis of the Cr volatility of chromia-forming alloys as interconnect for SOFC applications.Keywords
This publication has 34 references indexed in Scilit:
- Metallic interconnects for solid oxide fuel cellsMaterials Science and Engineering: A, 2005
- Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistanceMaterials Research Bulletin, 2003
- Evaluation of Fe-Cr Alloys as Interconnects for Reduced Operation Temperature SOFCsJournal of the Electrochemical Society, 2003
- Selection and Evaluation of Heat-Resistant Alloys for SOFC Interconnect ApplicationsJournal of the Electrochemical Society, 2003
- Application of Fe–16Cr ferritic alloy to interconnector for a solid oxide fuel cellSolid State Ionics, 2001
- Characterization of iron-based alloy interconnects for reduced temperature solid oxide fuel cellsSolid State Ionics, 2000
- Chromium Vapor Species over Solid Oxide Fuel Cell Interconnect Materials and Their Potential for Degradation ProcessesJournal of the Electrochemical Society, 1996
- Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacksJournal of Materials Science, 1996
- Degradation phenomena in the cathode of a solid oxide fuel cell with an alloy separatorJournal of Power Sources, 1995
- Ceramic and Metallic Components for a Planar SOFCBerichte der Bunsengesellschaft für physikalische Chemie, 1990