Numerical Study on Vibration Response of Compressor Stator Blade Considering Contact Friction of Holding Ring
Open Access
- 23 May 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (11) , 6380
Abstract
There are many kinds of assembly structures in heavy-duty gas turbine compressor stator blades which have significant influence on the complex damping vibration characteristics. At present, compressor design is becoming more and more compact, so it is very meaningful to accurately obtain stator blade vibration characteristics of structures with contact damping. Firstly, a fretting slip friction dynamic model was introduced, and then a vibration analysis model of the compressor stator blade with outer ring structure was established based on the slip friction theory. Then, the vibration response of the compressor stator blade was obtained according to various working conditions, and the main factors affecting the vibration characteristics of the stator blade were revealed. Finally, the vibration response of the blade under a particular exciting force condition was simulated. The results show that the damping vibration characteristics of the compressor stator blades were affected by the excitation force and the normal load of the contact surface. The vibration response curve of the stator blade and the equivalent stiffness coefficient of the contact surface were analyzed, and the friction motion of the contact surface changed with the change of the working condition. The model can simulate the nonlinear vibration characteristics of stator blades. This method provides a reference for the vibration safety analysis of compressor stator blades.Keywords
Funding Information
- National Science and Technology Major Project (J2019-IV-0022-0090)
This publication has 18 references indexed in Scilit:
- Compressor Efficiency Variation With Rotor Tip Gap From Vanishing to Large ClearanceJournal of Turbomachinery, 2013
- The effect of underplatform dampers on the forced response of bladed disks by a coupled static/dynamic harmonic balance methodInternational Journal of Non-Linear Mechanics, 2011
- Explicit Finite Element Models of Friction Dampers in Forced Response Analysis of Bladed DisksJournal of Engineering for Gas Turbines and Power, 2008
- Statistics of responses of a mistuned and frictionally damped bladed disk assembly subjected to white noise and narrow band excitationsProbabilistic Engineering Mechanics, 2006
- A Method for Use of Cyclic Symmetry Properties in Analysis of Nonlinear Multiharmonic Vibrations of Bladed DisksJournal of Turbomachinery, 2004
- Contact Stresses in Dovetail Attachments: Alleviation via Precision CrowningJournal of Engineering for Gas Turbines and Power, 2003
- Contact Stresses in Dovetail Attachments: Physical ModelingJournal of Engineering for Gas Turbines and Power, 2002
- Contact Stresses in Dovetail Attachments: Finite Element ModelingJournal of Engineering for Gas Turbines and Power, 1999
- STICK–SLIP–SEPARATION ANALYSIS AND NON-LINEAR STIFFNESS AND DAMPING CHARACTERIZATION OF FRICTION CONTACTS HAVING VARIABLE NORMAL LOADJournal of Sound and Vibration, 1998
- An Elastic Mechanism for the Micro-Sliding Characteristics between Contacting Machined SurfacesJournal of Mechanical Engineering Science, 1978