Thermal Properties of Sago Fiber-Epoxy Composite
Open Access
Abstract
The aim of this study is to analyze the thermal properties of sago fiber-epoxy composite. The sago fiber-based composite has been prepared using epoxy resin as the matrix, via a simple mixing followed by compression. The compression process includes hot compression (100 °C/10 kgf cm−2) and cold compression (ambient/10 kgf cm−2). The composite series was prepared with 9%, 13%, 17%, 20%, and 23% (w/w) of epoxy resin. Microstructures of all materials used were observed using an SEM (scanning electron microscope) instrument. The thermal properties of the composite and its components were examined through TG/DTA characterization. The samples were heated using the heating rate of 10 °C/min from room temperature to 400 °C, except for epoxy resin, which was heated to 530 °C. TG/DTA results depict three stages of thermal processes of sago fiber-epoxy composite: evaporation of water molecules at below 100 °C with the peak point within the range of 51.3 and 57.3 °C, the damage of sago fiber within the range of 275 and 370 °C with the peak point within the range of 333.3 and 341.3 °C and the damage of epoxy resin at above 350 °C with the peak point at 376.2 °C.Keywords
This publication has 23 references indexed in Scilit:
- Polypropylene/hemp woody core fiber composites: Morphology, mechanical, thermal properties, and water absorption behaviorsAdvances in Mechanical Engineering, 2016
- Influence of Voids on the Tensile Performance of Carbon/epoxy Fabric LaminatesJournal of Materials Science & Technology, 2011
- On the thermal degradation of cellulose in cotton fibersJournal of Thermal Analysis and Calorimetry, 2010
- Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibersMaterials & Design (1980-2015), 2010
- Ecodesign of automotive components making use of natural jute fiber compositesJournal of Cleaner Production, 2010
- Performance of “Agave lecheguilla” natural fiber in portland cement composites exposed to severe environment conditionsBuilding and Environment, 2007
- Glass transition and thermal decomposition of epoxy resins from the carboxylic acid system consisting of ester-carboxylic acid derivatives of alcoholysis lignin and ethylene glycol with various dicarboxylic acidsThermochimica Acta, 2005
- Are natural fiber composites environmentally superior to glass fiber reinforced composites?Composites Part A: Applied Science and Manufacturing, 2004
- Effect of Fiber Length on Mechanical Properties of "Green" Composites Using a Starch-Based Resin and Short Bamboo FibersJSME International Journal Series A, 2004
- Natural fiber polymer composites: A reviewAdvances in Polymer Technology, 1999