STUDY ON THE ACETYLENE HYDROGENATION PROCESS FOR ETHYLENE PRODUCTION: SIMULATION, MODIFICATION, AND OPTIMIZATION
- 15 March 2013
- journal article
- research article
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 200 (7) , 863-877
Abstract
In this study, an industrial acetylene hydrogenation unit is simulated utilizing three available kinetic models. The results are compared against six-day experimental data and the best model is selected. Effects of feed temperature and the amount of injected hydrogen on ethylene selectivity are also studied. According to the simulation results, the unit is not working under its optimum conditions. Furthermore, by reduction of the hydrogen flow rate to 52 kg/h, process selectivity is increased. In addition, a new approach is proposed to modify the hydrogenation process and reduce undesired by-products. In the simulation of the modified process, hydrogenation reactors temperature, hydrogen flow rate, and H-1/H-2 ratio were regulated as adjustable parameters for the process optimization. The simulation shows that ethylene selectivity increases by 12%, while acetylene concentration and hydrogenation reactor temperature remains within acceptable ranges. Such selectivity could be achieved at the hydrogen flow rate of 50 kg/h with H-1/H-2 ratio of 0.1/0.9.Keywords
This publication has 25 references indexed in Scilit:
- Modification and optimization of benzene alkylation process for production of ethylbenzeneChemical Engineering and Processing - Process Intensification, 2011
- Estimation of Kinetic Parameters for Hydrogenation Reactions Using a Genetic AlgorithmChemical Engineering & Technology, 2009
- Palladium–gallium intermetallic compounds for the selective hydrogenation of acetylenePart I: Preparation and structural investigation under reaction conditionsJournal of Catalysis, 2008
- Selective acetylene hydrogenation over core–shell magnetic Pd‐supported catalysts in a magnetically stabilized bedAIChE Journal, 2008
- The influence of Pd–Ag catalyst restructuring on the activation energy for ethylene hydrogenation in ethylene–acetylene mixturesApplied Catalysis A: General, 2005
- Kinetic analysis of rate data for propylene and methylacetylene hydrogenationChemical Engineering and Processing - Process Intensification, 1996
- Experimental study of the front-end selective hydrogenation of steam-cracking C2-C3 mixtureChemical Engineering and Processing - Process Intensification, 1995
- A kinetic study of the hydrogenation of ethyne and ethene on a commercial Pd/Al2O3 catalystChemical Engineering and Processing - Process Intensification, 1993
- Mechanism and kinetics of the selective hydrogenation of ethyne and etheneChemical Engineering and Processing - Process Intensification, 1993
- Deuterium tracer study on the effect of carbon monoxide on the selective hydrogenation of acetylene over palladium/aluminaIndustrial & Engineering Chemistry Research, 1991