Mechanical Aging Test and Sealing Performance of Thermoplastic Vulcanizate as Sealing Gasket in Automotive Fuel Cell Applications
Open Access
Abstract
Ethylene–propylene–diene monomer (EPDM) rubber is one of the rapidly developing synthetic rubbers for use as a gasket material in proton exchange membrane (PEM) fuel cell applications. Despite its excellent elastic and sealing properties, EPDM faces challenges such as molding processability and recycling ability. To overcome these challenges, thermoplastic vulcanizate (TPV), which comprises vulcanized EPDM in polypropylene matrix, was investigated as a gasket material for PEM fuel cell applications. TPV showed better long-term stability in terms of tension and compression set behaviors under accelerated aging conditions than EPDM. Additionally, TPV exhibited significantly higher crosslinking density and surface hardness than EPDM, regardless of the test temperature and aging time. TPV and EPDM showed similar leakage rates for the entire range of test inlet pressure values, regardless of the applied temperature. Therefore, we can conclude that TPV exhibits a similar sealing capability with more stable mechanical properties compared with commercialized EPDM gaskets in terms of He leakage performance.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (20011117)
This publication has 35 references indexed in Scilit:
- A review on production, storage of hydrogen and its utilization as an energy resourceJournal of Industrial and Engineering Chemistry, 2014
- Dynamic mechanical characteristics of five elastomeric gasket materials aged in a simulated and an accelerated PEM fuel cell environmentInternational Journal of Hydrogen Energy, 2011
- Chemical degradation of five elastomeric seal materials in a simulated and an accelerated PEM fuel cell environmentJournal of Power Sources, 2011
- Sulfonation of vulcanized ethylene–propylene–diene terpolymer membranesActa Materialia, 2008
- Determination of twin‐screw extruder operational conditions for the preparation of thermoplastic vulcanizates on the basis of batch‐mixer resultsJournal of Applied Polymer Science, 2007
- Aging of ethylene–propylene–diene monomer (EPDM) in artificial weathering environmentPolymer Degradation and Stability, 2007
- Dynamic vulcanisation of EPDM/PE-based thermoplastic vulcanisates studied along the extruder axisPolymer, 2005
- Study on Parameters Affecting the Morphology Development of Dynamically Vulcanized Thermoplastic Elastomers Based on EPDM/PP in a Co-Rotating Twin Screw ExtruderRubber Chemistry and Technology, 2004
- International activities in DMFC R&D: status of technologies and potential applicationsJournal of Power Sources, 2004
- Photo- and thermo-oxidative degradation of photocrosslinked ethylene–propylene–diene terpolymerPolymer Degradation and Stability, 2003