Practical Applications of X-Ray Line Profile Analysis
Author:
- 1 January 2017
- book chapter
- Published by IGI Global Scientific Publishing
- p. 1094-1132
Abstract
In the previous chapters, the theory and the main methods of diffraction peak profile analysis were presented. Additionally, the specialties in the measurement and the evaluation of line profiles in the cases of thin films and single crystals were discussed. In this chapter, some practical considerations are given in order to facilitate the evaluation of peak profiles and the interpretation of the results obtained by this method. For instance, the procedures for instrumental correction are overviewed. Additionally, how the prevailing dislocation slip systems and twin boundary types in hexagonal polycrystals can be determined from line profiles is shown. Besides the dislocation density, the vacancy concentration can also be obtained by the combination of electrical resistivity, calorimetric, and line profile measurements. The crystallite size and the twin boundary frequency determined by X-ray peak profile analysis are compared with the values obtained by the direct method of transmission electron microscopy. Furthermore, the limits of line profile analysis in the determination of crystallite size and defect densities are given. Finally, short overviews on the results obtained by peak profile analysis for metals, ceramics, and polymers are presented.Keywords
This publication has 87 references indexed in Scilit:
- Twinning on pyramidal planes in hexagonal close packed crystals determined along with other defects by X-ray line profile analysisJournal of Applied Crystallography, 2009
- Influence of sintering temperature and pressure on crystallite size and lattice defect structure in nanocrystalline SiCJournal of Materials Research, 2007
- Correlation between subgrains and coherently scattering domainsPowder Diffraction, 2005
- Defect based micromechanical modelling and simulation of nanoSPD CP-Ti in post-deformationMaterials Science and Engineering: A, 2005
- Lattice defect investigation of ECAP-Cu by means of X-ray line profile analysis, calorimetry and electrical resistometryMaterials Science and Engineering: A, 2005
- The density and the character of dislocations in cubic and hexagonal polycrystals determined by X-ray diffractionMaterials Science and Engineering: A, 2001
- A new procedure of X-ray line profile analysis applied to study the dislocation structure and subgrain size-distributions in fatigued MANET steelJournal of Nuclear Materials, 2000
- Particle-size, size distribution and dislocations in nanocrystalline tungsten-carbideNanostructured Materials, 1999
- Dislocations, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysisActa Materialia, 1998
- Peak shape and resolution in conventional diffractometry with monochromatic X-raysJournal of Applied Crystallography, 1988